Directional Valves

CV04-20 & CV04-B20 — Check Valves
  Selection guide - similar valves.
  PDF file of this page
  STP file for CV04-20for CV04-B20
  Request a quote

CV04-(B)20 Valve

CV04-(B)20 Valve symbol

A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding
device. Available in conventional surface mount or convenient “down-hole” versions.

The CV04-20 and CV04-B20 allow flow passage from 1 to 2, while normally blocking oil
flow in the opposite direction. The cartridge has a fully guided check which is spring-biased
closed until sufficient pressure is applied at 1 to open to 2.

• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Fully guided check assembly.
• Miniature size.
• Fast closing and seating.

Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 255 bar (3700 psi)
Flow: Up to 5 lpm (1.5 gpm)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: Recommend 25µ nominal or better; See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC04-2 or VC04-B2; See page 9.104.1_2w
Cavity Tool: CT04-2xx or CT-B3xx; See page 8.600.1
Seal Kit: For CV04-20: SK04-2x-T; For CV04-B20: SK04-B2x-T; See page 8.650.1


CV04-(B)20 Valve Performance Chart

CV04-(B)20 Valve Dimensions


Cartridge: Weight: 0.05 kg (0.12 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and back-ups standard.

CV04-(B)20 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for CV04-20 for CV04-B20 Request a quote.