Directional Valves

CV10-24 — Check Valve
   Selection guide - similar valves.
   PDF file of this page.
   STP file for CV10-24.
   Request a quote.

CV10-24 Valve SYMBOL:
CV10-24 Valve symbol
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.

The CV10-24 allows flow passage from 2 to 1, while normally blocking flow from 1 to 2. The
cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied
at 2 to open to 1.

• Hardened seat for long life and low leakage.
• Optional bias springs for back-pressure application flexibility.
• Low check mass for anti-cavitation applications.
• Industry-common cavity.

Operating Pressure: 240 bar (3500 psi)
Flow: Up to 57 lpm (15 gpm)
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 241 bar (3500 psi)
Crack Pressure Defined: Gauge psi evident at 2 at 16.4 cc/minute (1 cu. in./minute) attained at 1
Standard Bias Springs at Crack: 0.35 bar (5 psi); 1.7 bar (25 psi); 3.8 bar (55 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
   -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1_2 w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-B; See page 8.650.1


CV10-24 Valve Performance Chart

CV10-24 Valve Dimensions


Cartridge: Weight: 0.09 kg (0.20 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O‑rings and polyester elastomer back-ups standard.

Standard Ported Body:
Weight: 0.16 kg (0.35 lb); Anodized high strength
6061 T6 aluminum alloy, rated to 240 bar (3500 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_2 w

CV10-24 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for CV10-24 Request a quote.