Directional Valves

PC10-34 — Check, Pilot-to-Open, 7:1 Pilot Ratio
  Selection guide - similar valves.
  PDF file of this page
  Request a quote

PC10-34 Valve

PC10-34 Valve symbol
A screw-in, cartridge-style, pilot-operated, hydraulic check valve for use in
blocking or load-holding circuits.

The PC10-34 allows free flow from 2 to 3, while normally blocking flow from 3 to 2.
Flow will be allowed from ports 3 to 2 when pressure is applied at 1.
The cartridge has a 7:1 pilot ratio.
The check is spring-biased to assure holding in static or no-load conditions. A sealed
pilot piston option is available.

• Higher pilot ratio reduces valve "chatter" in low flow applications.
• Choice of several bias spring values.
• Hardened seat for long life and low leakage.
• Optional sealed piston.
• Industry common cavity.

Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 749 bar (11000 psi)
Burst Pressure: 1157 bar (17000 psi)
Flow Rating: See Performance Graphs
Internal Leakage: (at 207 bar/3000 psi)
  Between ports 3 and 2: 0.10 ml/minute (2 drops/minute)
  Between ports 2 and 1 (without sealed piston): 115 ml/minute (7 cu. in./mimute)
  Between ports 2 and 1 (with sealed piston) zero leakage
Pilot Ratio: 7:1
Operating Fluid Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna seals;
  -26 to 204 °C (-15 to 400 °F) with fluorocarbon seals;
  -54 to 107 °C (-65 to 225 °F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Seal Kit: SK10-3X-TM; See page 8.650.1




PC10-34 Valve Performance Charts

PC10-34 Valve Performance Charts



PC10-34 Valve Dimensions




Cartridge: Weight: 0.10 kg. (0.21 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard.

Ported Body: Weight: 0.36 kg. (0.80 lbs.) Anodized high-strength aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_3w.



PC10-34 Ordering Chart