Directional Valves — HyPerformance

HLS06-30 — Load Shuttle, Ball-Type
  Selection guide - similar valves.
  PDF file of this page
  Request a quote

HLS06-B30 Valve

HLS06-B30 Valve symbol

A high pressure load-shuttling, screw-in, cartridge-style, hydraulic check valve for use in blocking
circuits where a priority of flow/direction is given to a higher pressure circuit over a lower one.

The HLS06-30 will allow flow from the higher pressure of port 1 or 3 to port 2.
The valve is commonly used to direct oil from the pressure side of a bidirectional hydraulic motor to a
pressure-released hydraulic brake. It can also be used as a load-sense signaling valve.

• Rapid response to load direction changes.
• Compact size.
• Lower pressure drop.
• Reduced space claim and smaller hydraulic "footprint".
• All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 7.6 lpm (2 gpm)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 350 bar (5075 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Viton seals
   -54° to 107°C (-65° to 225°F) with PPDI Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC06-3; See page 9.106.1_3w
Cavity Tool: HCT06-3xx; See page 8.600.1
Seal Kit: SK06-3X-XX; See page 8.650.1


HLS06-B30 Valve Performance Chart


HLS06-B30 Valve Dimensions


Cartridge: Weight: 0.04 kg. (0.08 lbs.);
Steel with Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard.


HLS06-B30 Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.