- Services & Support
- Sales & Distribution
PD16-45 — Piloted, 2-Way, Spool Valve, with Ported Vent
Selection guide - similar valves.|
PDF file of this page
STP file for PD16-45
Request a quote
A screw-in, cartridge-style, pilot-operated, spool-type, hydraulic directional valve
for two-way circuits requiring remote pilot actuation and vented spring chamber.
In neutral (unpiloted), the PD16-45 allows flow between 3 and 2. The spring chamber
is directed to port 4. On remote pilot signal at 1, the valve shifts to allow flow between 3 and 2.
Since port 4 is common to the spring chamber, pressure on 4 will directly (1:1) affect the
pilot pressure required, and must always be added to the bias spring value.
• Hardened spool and cage for long life.
• Optional sealed pilot
• Industry-common cavity.
Operating Pressure: 240 bar (3500 psi)
Flow: up to 189 lpm (50 gpm)
Maximum Internal Leakage at 207 bar (3000 psi): 164 cc/minute (10 cu. in./minute)
Pilot Pressure Required:
To Spool Crossover: 7.6 bar (110 psi)
To Full Spool Shift: 9.0 bar (130 psi)
Oil Volume Required to Full Shift: 2.5 cc (0.15 cu. in.)
Temperature: -40° to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-4; See page 9.116.1_4w
Cavity Tool: CT16-4xx; See page 8.600.1
Seal Kit: SK16-4x-MMM; See page 8.650.1
Cartridge: Weight: 0.52 kg (1.15 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Standard Ported Body:
Weight: 1.5 kg (3.3 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to
207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.016.1_4w
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD16-45.||Request a quote.|