- Services & Support
- Sales & Distribution
PD10-50 — Piloted, 3-Way, Spool Valve, Ported Vent
Selection guide - similar valves.|
PDF file of this page
STP file for PD10-50
Request a quote
A screw-in, cartridge-style, pilot-operated, spool-type, open-in-transition, hydraulic
directional valve for three-way circuits requiring remote pilot actuation.
In neutral (unpiloted), the PD10-50 allows flow from 3 to 2 bidirectionally while flow is
blocked at 4. The spring chamber is vented to tank at port 5, and is internally O-ring
sealed from the cartridge flow paths. On remote pilot signal at 1, the valve shifts to
block flow from 3 to 2, while opening flow between 3 and 4 bidirectionally. Any pressure
at port 5 is added to the spring value.
• Hardened spool and cage for long life.
• Industry common cavity.
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: up to 38 lpm (10 gpm)
Maximum Internal Leakage at 207 bar (3000 psi): 82 cc/minute (5 cu. in./minute)
Pilot Pressure Required:
To Spool Crossover: 10.3 bar (150 psi)
To Full Spool Shift: 12.2 bar (177 psi)
Oil Volume Required to Full Shift: 0.44 cc (0.027 cu. in.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals.
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-5; See page 9.110.1_5w
Cavity Tool: CT10-5xx; See page 8.600.1
Seal Kit: SK10-5x-MMMM; See page 8.650.1
Cap Vent Seal: 6003117
Cartridge: Weight: 0.20 kg (0.44 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Standard Ported Body:
Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to
207 bar (3000 psi). Ductile iron bodies available; dimensions may differ.
See page 8.010.1_5w
|Selection guide - similar valves.
||PDF file of this page.||STP file for PD10-50.||Request a quote.|