- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HPE42-M44 — Piloted, 2-Way, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page.
Request a quote.
A high-pressure, screw-in, cartridge-style, pilot-operated, proportional spool-type, hydraulic
When the HPE42-M44 is in neutral position (unpiloted), ports 2 and 3 are blocked bidirectionally.
On remote pilot signal at 1, the spool shifts proportionally to the applied pilot pressure to allow
flow from port 2 to 3 bidirectionally. The spring chamber is vented to port 4. Pressure at 4 will
directly (1:1) affect the pilot pressure required and must be added to the bias spring valve.
• Multiple function/application potential.
• Smooth shift transition.
• Low pressure drop.
• Hardened spool and cage for long life.
• Optional sealed pilot.
• Industry-standard ISO cavity
• All HyPerformance products are tested to the rigorous standards of the NFPA
• All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.
Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 170 lpm (45 gpm)
Maximum Internal Leakage: at 350 bar (5070 psi): 230 ml/minute (14 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna N seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
-54° to 107°C (-65° to 225°F) with standard PPDI Urethane seals
Ambient Temperature: -40 to 90°C (-40 to 194°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-M4; See page 9.142.1_4w
Cavity Tool: HCT42-M4xx; See page 8.600.1
Seal Kit: SK42-M4U-000 (PPDI Urethane); See page 8.650.1
Cartridge: Weight: 2.0 kg. (4.5 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; PPDI urethane O-rings without backup rings standard.
Ported Body: Weight: 10.68 kg.
(23.56 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi).
See page 8.042.1_4w
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|