- Services & Support
- Sales & Distribution
PE12-S67C — Piloted, Proportional, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page.
STP file for PE12-S67C.
Request a quote.
A screw-in, cartridge-style, pilot-operated, spring-centered, spool-type,
hydraulic directional valve.
In neutral position, the PE12-S67C blocks all ports. When the remote pilot signal
at 1 exceeds the force of the bias spring, the spool shifts proportionally to the applied
pilot pressure to allow flow from 3 to 4 through a load such as a hydraulic cylinder or
motor, and from 2 to 5 and to tank. On remote pilot signal at 6, the valve’s spool shifts
proportionally to the applied pressure in the opposite direction, reversing the flow direction.
The valve’s spool is symmetrical, providing meter-in and meter-out control.
• Hardened spool and cage for long life.
• Excellent metering characteristics.
• Good Linearity.
Max. Operating Pressure: Ports 3 and 5: 345 bar (5000 psi); Ports 2 and 4: 240 bar (3500 psi);
Ports 1 and 6: 27.6 bar (400 psi)
Flow: up to 45 lpm (12 gpm)
Maximum Internal Leakage: at 207 bar (3000 psi): 50 ml/minute (3 cu. in./minute)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
-26 to 204°C (-15 to 400°F) with fluorocarbon seals;
-54 to 107°C (-65 to 225°F) with polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-S6; See page 9.112.1_6w
Cavity Tool: CT12-S6xx; See page 8.600.1
Seal Kit: SK12-S6x-BMMMM; See page 8.650.1
Cartridge: Weight: 0.45 kg (0.98 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.
Ported Body: Test housing available.
See page 8.012.1_6w
|Selection guide - similar valves.
||PDF file of this page.||STP file for PE12-S67C.||Request a quote.|