- Services & Support
- Sales & Distribution
Directional Valves — HyPerformance
HPE16-S67D — Piloted, Proportional, Spool-Type Valve
Selection guide - similar valves.|
PDF file of this page.
Request a quote.
U.S. Patent 6,554,014
A high pressure, screw-in, cartridge-style, proportional, pilot-operated, spring-centered, spool-type,
hydraulic directional valve.
In neutral position, the HPE16-S67D blocks port 3 while 2, 4 and 5 are connected to each other.
When the remote pilot signal at 1 exceeds the force of the bias spring, the spool shifts
proportionally to the applied pilot pressure to allow flow from 3 to 4 through a load such as a
hydraulic cylinder or motor, and from 2 to 5 and to tank. Port 5 is to be used as a tank port only
with maximum pressure of 69 bar (1000 psi). On remote pilot signal at 6, the valve’s spool shifts
proportionally to the applied pressure in the opposite direction, reversing the flow direction. The
valve’s spool is symmetrical, providing meter-in and meter-out control.
• Hardened spool and cage for long life.
• Cost-effective cavity.
• Excellent metering characteristics.
• Good Linearity.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification
T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.
Max. Operating Pressure: Ports 2, 3, 4: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi);
Ports 1 and 6 (pilot): 35 bar (500 psi); Port 5 (tank): 69 bar (1000 psi)
Flow: 95 lpm (25 gpm)
Maximum Internal Leakage: at 350 bar (5075 psi): 500 ml/minute (30 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
-54° to 107°C (-65°F to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-S6; See page 9.116.1_6w
Cavity Tool: HCT16-S6xx; See page 8.600.1
Seal Kit: HSK16-S6U-0000; See page 8.650.1
Cartridge: Weight: 1.1 kg.
(2.4 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals without back-ups standard.
Ported Body: Weight: 9.13 kg.
(20.14 lbs.) H-series ductile iron standard. Rated to 345 bar
(5000 psi). See page 8.016.1_6w
|Selection guide - similar valves.
||PDF file of this page.||Request a quote.|