Directional Valves

PE42-S67H — Piloted, Proportional, Spool-Type Valve
  Selection guide - similar valves.
  PDF file of this page.
  STP file for PE42-S67H.
  Request a quote.

PE42-S67H Valve

U.S. Patent 6,554,014

PE42-S67H Valve symbol

A screw-in, cartridge-style, pilot-operated, spring-centered, spool-type,
hydraulic directional valve.

In neutral position, the PE42-S67H blocks port 3 while ports 2, 4 and 5 are in
communication with each other. When the remote pilot signal at 1 exceeds the
force of the bias spring, the spool shifts proportionally to the applied pilot pressure
to allow flow from 3 to 4, through a load such as a hydraulic cylinder or motor, and
from 2 to 5 and to tank. On remote pilot signal at 6, the spool shifts proportionally to
the applied pressure in the opposite direction, thus reversing the flow direction. The
valves spool is symmetrical, providing meter-in and meter-out control.

• Hardened spool and cage for long life.
• Cost-effective ISO cavity.
• Excellent metering characteristics.
• Good Linearity.

Max. Operating Pressure: Port 3: 345 bar (5000 psi) with polyurethane seals;
   Ports 2 and 4: 240 bar (3500 psi); Ports 1 and 6: 27.6 bar (400 psi)
Flow: up to 170 lpm (45 gpm)
Maximum Internal Leakage: at 207 bar (3000 psi): 1180 ml/minute (72 cu. in./minute)
Temperature: -40 to 100 °C (-40 to 212 °F) with Buna seals;
   -26 to 204 °C (-15 to 400 °F) with Fluorocarbon seals;
   -54 to 107 °C (-65 to 225 °F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC42-S6; See page 9.142.1_6w
Cavity Tool: CT42-S6xx; See page 8.600.1
Seal Kit: SK42-S6x-BMMMM; See page 8.650.1


PE42-S67H Performance

PE42-S67H Valve Dimensions


Cartridge: Weight: 0.76 kg (1.68 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.

Ported Body: Ductile iron, rated to
345 bar (5000 psi).
See page 8.042.1_6w

PE42-S67H Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PE42-S67H. Request a quote.