SYMBOL:
 |
|
DESCRIPTION
A spool-type, screw-in, cartridge-style, hydraulic directional element, with multifunction potential when used with other directional, pressure, or flow control devices.
OPERATION
The EP16-S35 is a spring-biased blocking valve which will shift to allow full flow from 1 to 2 only when pressure at 1 exceeds the cumulative pressure of 3, plus the bias spring pressure value.
EP16-S35 is a pilot-to-close directional valve. With no pressure at 3, flow will be allowed from 1 to 2 once the bias spring force is overcome with pressure at 1.
It requires a tall cap when specified with bias springs from 6,2 to 16,5 bar (90 to 240 psi). The 240 psi spring reequires an extra tall cap. A manual override option is also available for the valves with bias springs from 6,2 to 16,5 bar (90-240 psi).
Note: Orifice discs should not be used with this valve.
FEATURES
• Multiple function/application potential.
• Low pressure drop.
• Industry common cavity.
• Manual override available with 90, 110, 160, and 240 psi bias springs.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 420 bar (6090 psi)
Flow: Up to 189 lpm (50 gpm)
Internal Leakage: 164 cc/minute (10 cu. in/minute) max. at 207 bar (3000 psi)
Operating Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
-54 to 104°C (-65 to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-S3; See page 9.116.1_3w
Cavity Tool: CT16-S3xx; See page 8.600.1
Seal Kit: SK16-S3x-MM; See page 8.650.1 |
