Directional Valves

MP10-21 — Manual, Pull-to-Open, Push-to-Close Valve
   Selection guide - similar valves.
   PDF file of this page.
   Request a quote.

MP10-21 Valve

MP10-21 Valve symbol


A manual, 2-way, pull-to-open, push-to-close, screw-in hydraulic directional valve.

The MP10-21 blocks flow from 2 to 1 until an operator pulls the shaft outward.

• Hardened seat for long life and low leakage.
• Industry-common cavity.

Operating Pressure: 207 bar (3000 psi)
Flow: 56.8 lpm (15 gpm)
Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 207 bar (3000 psi)
Mechanical Pull Effort Required at Rated Pressure: 7.3 kg. (16.0 lbs.)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals
   -54 to 107C (-65F to 225F) with polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-2; See page 9.110.1_2w
Cavity Tool: CT10-2xx; See page 8.600.1
Seal Kit: SK10-2x-T; See page 8.650.1




MP10-21 Valve Performance Chart



MP10-21 Valve Dimensions



Cartridge: Weight: 0.11 kg (0.25 lb).
Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester
elastomer back-ups standard. Plastic knob optional.

Standard Ported Body: Weig ht: 0.16 kg
(0.35 lb) Anodized high-strength aluminum
alloy, rated to 207 bar (3000 psi). Ductile iron
bodies available; dimensions may differ.
See page 8.010.1_2w.



MP10-21 Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.