Electronic and Electro-Hydraulic Controls

EVDR18 — Eighteen Digital Input Module
with J1939 I/O Communications

PDF file of this page
ExDR-Type Configuration Software Manual – PDF file
ExDR-Type Controllers Software Bulletin – PDF file
ExDR-Type Controllers Selection Guide
Valve Coils and Electronic Controllers – Contents
Electronic Vehicle Controls – Intro. & Contents
Request a quote

• • Microprocessor based control (standard software or OEM software on request).
• • Standard hardware and software adapts to many applications.
• • Robust 8-32 VDC power supply interface
  with reverse polarity protection.
• • Thermal overload and overvoltage protection provided.
• • Rugged IP67-rated packaging with
  IP69K-rated plug-in connections.
• • Operational from –40 to 85°C
  (–40 to 185°F).
• • CAN for networking capability, user configuration and diagnostics.

The EVDR18 Input Module measures up to 18 inputs and sends the data over
a CAN network. The 10 inputs can be configured for Digital (High or Low). The
remaining 8 inputs can be configured for Digital (High or Low), PWM, Frequency/RPM, or Counter. CAN bus communications offer control system networking capabilty and is used for configuration.

This versatile, multi-function controller is suitable for a wide range of heavy duty industrial, marine, and mobile off-highway equipment applications such as
transmission controls, vehicle traction controls, and drive-by-wire control systems

RATINGS

Power Required: 8 to 32 VDC;
  Operating Current: 0.10 amp maximum, typically less than 2W;
  Non-Destructive Voltage: –32 to +75 VDC

Processing and Memory: Motorola Microprocessor: DSP56F8346;
Flash ROM: 128 KByte; SRAM: 4 KByte; EEPROM: 8 KBytes

All input and output characteristics are configurable with the
Application Configuration Programmer (ACP) software.
See Configuration Software Manual - PDF file

Communication I/O: CAN J1939 standard; for CANopen, consult factory

Inputs, 18 Configurable:
PWM: 0 to 100%, 1Hz to 10 KHz, 32 Vp-p; Accuracy: ±1.25%
RPM: 50 Hz to 10 KHz, 50 mV to 3V RMS; Accuracy: ±1.0%
Counter: 0 to 32 VDC, 10 KHz
Digital: 0 to 32 VDC, 2.5V Threshold

Operating Temperature Range: –40°C to +85°C (–40°F to +185°F)
Storage Temperature Range: –50°C to +125°C (–58°F to +257°F)
Humidity Tolerance: 115% of nominal system voltage at 90% relative
  humidity over operating temperature range
Salt Spray Tolerance: 115% of nominal system voltage
  with 5% salt spray for 48 hours at 35°C
Vibration (Shock-isolated components): 7.4 Grms random vibration
  from 24 Hz to 2 KHz in three orthagonal planes
Moisture Leakage (sealant pressure tolerance): ±0.35 bar (5 psi)
  against water and water vapor; immersion resistant in 3 ft. (1 meter)
  of water; meets IP67 standards.
Radiated Immunity: 10 V/M; 80 MHz to 1.0 GHz
Electrostatic Environment: Zero damage during exposure to electrostatic painting process (IEC 61000-4-2)

Materials: Housing: Thermoplastic with silicone elastomer seals;
  Contacts: Tin-plated copper alloy

DIMENSIONS:

PINOUT:

TO ORDER:

Five Valve Driver Model EVDR18 — Part No. 4000262
Connector Kits for EVDR18 — J1: DTM06-12A Kit, Grey: 4001976; J2: DTM06-12B Kit, Black: 4001977
Configuration Kit for EVDR18 — Includes Converter, Cable and Software: 4000250
CAN Flashing Cable for EVDR18 — Part No. 4000683