SYMBOL:
 |
DESCRIPTION
A screw-in, cartridge-style, adjustable orifice, pressure-compensated, manually-operated,
bypass-type hydraulic flow regulating valve. It can be used as a priority-type flow regulator
or a restrictive-type 2-way flow regulator when the bypass port (2) is blocked.
OPERATION
The FR10-39 maintains a constant flow rate from 3 regardless of load pressure changes in the
system downstream of 3, or in the bypass leg at 2. Reverse flow (3 to 1) bypasses the control orifice. The regulated flow increases from closed to fully open, with counter-clockwise rotation of the knob.
Note: When used as a bypass flow control in applications where the priority flow port
will be blocked by external valving, bypass pressure drop will increase unless a small
amount of leakage is provided for the priority port. Consult factory.
FEATURES
• Bypass port 2 may be fully pressurized.
• Fine low-torque adjustment.
• Hardened steel parts for long life.
• Quiet, modulated response.
• Industry-common cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Flow Rate: 3-ported regulated flow: 0–38 lpm (0–10 gpm);
2-ported regulated flow: 0–34 lpm (0–9 gpm);
For higher flow rates, see the FR10-33 valve (page 5.372.1)
Input Flow: 3-ported: 0–38 lpm (0–10 gpm) nominal; 0–57 lpm (0–15 gpm) maximum
Internal Leakage: 33 cc/minute (2 cu. in./minute) at 207 bar (3000 psi)
Adjustment Torque Required: 1.7 Nm (15 inch-pounds) at 207 bar (3000 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-MM; See page 8.650.1
Knob Kit: Part No. 6113160
|
