|
News Ticker . . .
New HyPerformance High Pressure Directional valves are now available.
HPD42-S67C HyPerformance™ Piloted 4-way Spool-Type. Operating pressure 350 bar (5075 psi). Flow 189 lpm (50 gpm). HPD42-S67D HyPerformance™ Piloted 4-way Spool-Type. Operating pressure 350 bar (5075 psi). Flow 189 lpm (50 gpm).
Posted December, 2011
New HyPerformance High Pressure Directional valves are now available.
HCV12-20 HyPerformance™ Check Valve. Operating pressure 350 bar (5075 psi). Flow 95 lpm (25 gpm). HEP42-S38 HyPerformance™ Piloted Poppet-Type valve. Operating pressure 350 bar (5075 psi), Flow up to 284 lpm (75 gpm).
Posted November, 2011
The Patented RV16-26 valve operating pressure has been up-rated to 4000 psi (275 bar). Polyurethane seal option now available.
Posted November, 2011
HEC12-32, HEC12-34 HyPerformance™ High Pressure, Pressure Compensators,
and HEC12-42, HEC12-43 HyPerformance™ Load Sense Pressure Compensators
for Pressures up to 350 bar (5075 psi).
Posted November 2011
Directional HyPerformance High Pressure valves are now available.
Two new H-Series valve models for operating pressure up to 350 bar (5075 psi). Flow 265 lpm/
70 gpm.
2-Way Directional HPD42-M44 and HPD42-M45.
Posted October, 2011
RVCV56-20 is now available with Anti-Cavitation spring.
Direct-acting, poppet-type hydraulic relief valve with a built-in reverse-flow anti-cavitation check valve. Flow: Port 1 to 2: 115 lpm
(30 gpm);
Port 2 to 1: 175 lpm (46 gpm).
Posted October, 2011
TS10-36 updated catalog page now available. Pilot-operated, spool-type hydraulic reducing/relieving valve. Flow 57 lpm/15 gpm. Pressure 241 bar/3500 psi.
Posted October, 2011
The following Solenoid Valves:
SV10-P20A, SV10-P22A, SV10-P23A, SV12-P23A, and SV58-P20A
are now available with Integral Position Sensing. For more information on these sensing options, please Click Here.
Posted August 18, 2011
HydraForce Awarded Patent For Innovative SPCL and SVCL Design
Valve Designer Randy Jackson, Application Engineer Jeff Oligmueller, and VP of Sales and Marketing Tony Casale where awarded patents for their input on design and development of the SPCL series of valves.
Read more...
Posted July 20, 2011
SPCL16-40 Electro-Proportional — Directional Control
4-way, poppet-type, normally closed with check-Isolated load sense; Flow up to
152 lpm/40 gpm. Pressure 250 bar/3625 psi.
Posted July 20, 2011
SVCV12-20 Solenoid-Operated
2-way, pilot-operated, poppet-type, normally closed with reverse flow check; Flow up to 113.6 lpm/30 gpm. Pressure 240 bar/3500 psi.
Posted July 5, 2011
SP08-24 Electro-Proportional — Directional Control
Proportional directional valve, 2-way, normally closed, metering; Flow up to 11.4 lpm/3 gpm. Pressure up to 207 bar/3000 psi.
Posted June 16, 2011
HydraForce is pleased to announce the opening of a new sales/service office in
Huesca, Spain. Posted May 16, 2011
HydraForce is pleased to announce the opening of a new sales/service office in
Zweibrücken, Germany. Posted Apr. 12, 2011
CeMAT 2-6 May, 2011 Hannover, Germany — Visit HydraForce at Hall 25, Stand D13
Posted Mar. 31, 2011
SV10-47E Dual-Solenoid 4-way, 3-position, spool-type valve.
Flow up to 30 lpm/8 gpm. Pressure up to 250 bar/3625 psi.
Posted Mar. 15, 2011
Solenoid-Operated HyPerformance High Pressure valves are now available.
Eight new H-Series valve models for operating pressure up to 350 bar (5075 psi).
Posted Feb. 14, 2011
CV06-B20 and CV06-B21 06-size High Pressure Check Valves
For Below-Surface Mounting. Flow up to 7.6 lpm/2 gpm. Pressure up to 345 bar/5000 psi.
Posted Feb. 1, 2011
HydraForce is pleased to announce the October 2011 opening of its
New operating facility in Changzhou, China.
The China location will serve as the company’s operating base for Asia/Pacific markets and will include manifold manufacturing responsibility, assembly and test capabilities, combination valve design, as well as customer service and sales support activities.
Posted Jan. 4, 2011
HSP16-20 Electro-Proportional Directional Control Valve 2-way, normally closed, poppet-type, low leakage. HyPerformance™ High Pressure up to 350 bar/5075 psi.
Flow up to 265 lpm/70 gpm.
Posted Dec. 8, 2010
SV20-28 Solenoid-Operated On/Off Valve 2-way, normally closed, poppet-type, low leakage. Flow up to 303 lpm/80 gpm. Pressure up to 207 bar/3000 psi.
Posted Dec. 8, 2010
HEC32-43 HyPerformance Pressure Compensator,
High Pressure and High Flow Capacity
Pressure up to 350 bar (5075 psi). Flow up to 530 lpm/140 gpm.
Posted Nov. 8, 2010
NV08-23 Needle Valve, Fine Adjustment Pressure up to 241 bar (3500 psi).
Flow up to 38 lpm/10 gpm
Posted Nov. 3, 2010
TS58-21F Electro-Proportional Pressure Control Valve High Pressure up to 393 bar (5700 psi). Direct acting, poppet-type hydraulic relief valve. Flow up to 1.9 lpm/0.5 gpm
Posted Oct. 15, 2010
SV10-40A Solenoid-Operated On/Off Valve 4-way, 2-position, spool-type, direct-acting;
Flow from 0 to 38 lpm/10 gpm; Operating pressure up to 207 bar (3000 psi).
Posted Oct. 15, 2010
SP10-24 Electro-Proportional Directional Valve 2-way, normally closed, metering;
Flow from 0 to 26.5 lpm/7 gpm; Operating pressure up to 207 bar (3000 psi).
Posted Oct. 6, 2010
HEP16-S35 HyPerformance High Pressure Piloted Spool-Type Logic Element is now available. Operating Pressure up to 350 bar (5075 psi). Flow up to 190 lpm (50 gpm).
Posted Oct. 5, 2010
HEV16-S34 HyPerformance High Pressure Vented Spool-Type Logic Element is now available. Operating Pressure up to 350 bar (5075 psi). Flow up to 190 lpm (50 gpm).
Posted Oct. 5, 2010
HyPerformance High Pressure Valves Brochure
is now available in German (Deutsch) language.
Posted Sept. 9, 2010
New CoreTek™ ECUs (Electronic Control Units) are now available.
These general-purpose programmable controllers are designed to withstand the real-world environmental demands of the off-highway mobile market. They can be used as stand-alone controllers, or for integrating into a CAN network with other devices. They feature flexible input and output configuration, and are capable of driving up to 3.0 Amps per output pin.
• Controller programming using the flexible CoDeSys 2.3 Programming Tool.
• Advanced electronic design for reliability and accuracy.
• Reliable operation in real-world temperature conditions from -40° to +70°C.
• Fully-sealed, compact cast-aluminum housing.
• Inputs and Outputs are protected against shorts.
• Outputs have diagnostic capability.
• No external cooling or heat dissipation required.
Complete info. including Full Color Brochure,
Request a Demo, Tech Manuals and more . . .
Posted Aug. 20, 2010
ERT120 Thermistor Temperature Sensor Now Available. See all sensors.
Posted Aug. 6, 2010
HydraForce Valve Library in Automation Studio™
HydraForce is incorporating over 900 valves, components, and options into
Automation Studio. HydraForce and Famic are developing detailed, functional
simulations for Automation Studio software that will simulate HydraForce products performance in a hydraulic circuit.
The entire HydraForce valve and component library, as well as i-Design are fully compatible with Automation Studio V5.7. i-Design users will be able to start a project in i-Design and then seamlessly export it into Automation Studio for simulation.
Posted July 13, 2010
SVRV12-26F New Dual-Function solenoid valve with integral pressure relief,
for pressures up to 297 bar (4300 psi) and flows up to 189 lpm (50 gpm).
See catalog page • See application bulletin
Posted June 29, 2010
SP08-20 2-Way Electro-Proportional Valve now with Manual Override options 'J' and 'Y'
Posted June 23, 2010
CRV10-22 Cross-Over Relief Valve Package.
Flow capacity has been uprated from 75.8 lpm (20 gpm) to 113.4 lpm (30 gpm)
Posted June 11, 2010
PD10-50 Directional Valve has new 6.9 bar (100 psi) Bias Spring option.
Posted May 17, 2010
CB10-30 Motion Control Valve.
Height dimension for adjustment option A is changed from 1.81" (46.0 mm)
to 2.17" (55.1 mm).
Posted May 14, 2010
NOTICE: Support for i-Design v2 will end on June 1, 2010. More info. here.
Posted April 29, 2010
EHPR98-T35 and EHPR98-T38 Electro-Proportional Reducing/Relieving,
Drop-in style valves. Added Zener Diode option to model code.
Posted April 22, 2010
EHPR98-T33 Electro-Proportional Reducing/Relieving, Drop-in style valve.
Added Fluorocarbon and Polyurethane seal options.
Added Zener Diode option to model code.
Posted April 22, 2010
RV58-20 Pressure Relief Valve.
Low end of spring range is updated from 20.7 bar (300 ps)i to 55.2 bar (800 psi).
Posted April 16, 2010
RV50-26 Pressure Relief Valve.
Low end of spring range is updated from 20.7 bar (300 psi) to 27.6 bar (400 psi).
Added U.S. Patent No. 7,137,406
Posted April 16, 2010
PR12-36 Pressure Reducing/Relieving Valve.
Low end of Code "30" spring range is updated from 13.8 bar (200 psi) to 20.7 bar (300 psi).
Added Code "4" spring range
from 6.9 to 27.6 bar (100 to 400 psi)
Posted April 16, 2010
PD12-42 Piloted 3-Way Directional Valve.
Added Bias Spring Option Code "60": 4.1 bar (60 psi).
Posted April 16, 2010
EHPR98-T35 Electro-Proportional Reducing/Relieving, Drop-in style valve.
Added spring option.
Posted April 16, 2010
SV58-40 Solenoid-Operated On/Off Valve, 4-Way, 2-Position, High Pressure.
Internal leakage spec updated from 131 ml/min. (8 cu. in./min.)
to 180 ml/min. (11 cu.in/min.)
Posted April 16, 2010
HydraForce 2010 Full-Line Product Guide is now available
in multiple languages.
Chinese (中文) • Deutsch (German) • Francais
Italiano • Korean (한국어) • Spanish (Español)
Posted April 12, 2010
Directional Control Solutions Brochure is now available in English language.
Posted March 31, 2010
Pilot Systems Brochure is now available in Deutsch (German) language.
Posted March 25, 2010
HEP42-S39 HyPerformance High Pressure Vented Logic Element now available.
Pressure up to 350 bar (5075 psi); Flow up to 285 lpm (75 gpm).
Posted March 23, 2010
HydraForce is pleased to announce the launch of the HydraForce China website.
海德福斯高兴地宣布开通了 海德福斯中国 网站
Full web pages, product details and product search can be found at http://www.hydraforce.com/HydraforceCN/
在http://www.hydraforce.com/HydraforceCN/中,可搜索全部产品, 产品详介,和单个产品.
http://www.hydraforce.com/HydraforceCN • http://www.海德福斯.com/海德福斯CN
Posted March 16, 2010
Updated Product Guide is now available in English language.
Posted March 16, 2010
TS90-31 replaces the obsolete model TS98-31. New TS90-31 offers higher flow,
up to 38 lpm/10 gpm, and uses the same VC98-3 cavity as the older TS98-31.
For more details and a side-by-side comparison of the two valves, see info. bulletin.
Effective June 1, 2010, the TS98-31 will no longer be available.
Posted Feb. 26, 2010
Our RoHS (Restriction of Hazardous Substances) Compliance Statement
has been updated.
Posted Feb. 22, 2010
Amp Junior Timer E-Coils are now available.
And other updates to the E-Coil product line.
Posted Feb. 19, 2010
Material Handling Brochure is now available in Deutsch (German) language.
Posted Feb. 19, 2010
Updated Cartridge Installation Torque information is now available.
Posted Feb. 18, 2010
CV16-20 Check Valve is now available with 10.3 bar/ 150 psi bias spring option.
Posted Feb. 18, 2010
EVDR7 Multi I/O controller is now available. This CAN/J1939 capable controller
has four universal inputs, two control outputs and provides up to four-5V references.
To see the updated EVDR Controllers Selection Guide, click here.
Posted Feb. 8, 2010
HyPerformance High Pressure Valves brochure is updated with many new models.
Posted Feb. 1, 2010
New Pilot Valves and Systems brochure is now available.
Posted Jan. 25, 2010
Our CE Directive has been amended in accordance with the 91/368/EEC, 93/44/EEC, 93/68/EEC, The Supply of Machinery Directive 2006/42/EC, and EMC Directive 89/336/EEC.
Posted Jan. 21, 2010
ERT130 Heavy Duty Thermistor Temperature Sensor is now available.
Temperature range from -40°C to 135°F (-40°F to 275 °F).
Posted Jan. 18, 2010
SV58-30, SV58-40 and SV58-41 Solenoid Valves have been re-released. They are
rated to 345 bar/ 5000 psi with a pressure restriction of 275 bar/ 4000 psi at Port 1.
Posted Jan. 4, 2010
PRES50-30 Direct Acting, Reducing/Relieving Valve is now available.
This valve reduces high system pressures for secondary machine functions.
By using this valve, secondary-function manifolds can be aluminum, saving
cost and weight. This valve is rated to 345 bar / 5000 psi, up to 11.9 lpm/ 3 gpm.
Posted Dec. 10, 2009
EHPR98-T35 is now rated to 103 bar / 1500 psi. If higher inlet pressure is required
(103 bar/1500 psi to 241 bar/3500 psi) select the “A” option in the model code.
Posted Dec. 10, 2009
EC08-32 Pressure Compensator is now available with 5.5 bar/ 80 psi
and 17.2 bar / 250 psi Compensator Spring options.
Posted Dec. 10, 2009
PD16-S63 Pilot Operated Directional Valve is now available.
This valve is rated to 241 bar/ 3500 psi, up to 151.4 lpm/ 40 gpm.
Posted Dec. 10, 2009
PD16-S67C Pilot Operated Directional Valve is now available.
This valve is rated to 345 bar / 5000 psi, up to 11.9 lpm/ 3 gpm.
Posted Dec. 10, 2009
MP58-30 Manual, Pull-to-shift, Spring Return Directional Valve is now available.
This valve is rated to 345 bar/ 5000 psi, up to 24 lpm/ 6.5 gpm
Posted Dec. 10, 2009
|
