Diesel Engine Controls

PR50-38 — Pressure Regulator
  More Diesel Control Products.
  PDF file of this page.
  STP file for PR50-38.
  Get Custom Powertrain Control Engineering Assistance

PR50-38 Valve

SYMBOL:
PR58-38 Valve symbol

DESCRIPTION
A screw-in, cartridge-style, direct-acting, spool-type, pressure regulator with internal
spring-chamber drain and spool damping chamber. Port 2 may be protected with a
60 mesh 250 micron rated screen. It may be specified for use as a pressure regulator
for diesel engine applications including variable flow pumps, fuel and oil controls, and
SCR/EGR emission and exhaust controls.

OPERATION
In its steady state, the PR50-38 allows flow to pass bidirectionally from 2 to 1, with the
spring chamber constantly drained at 3. On attainment of a pre-determined pressure at 1,
the cartridge shifts to block flow at 2, thereby regulating pressure at 1. In this mode, the
valve also will relieve 1 to 3 at a user-specified value over the set reducing pressure. Tank
port pressure is additive to the pressure setting at a ratio of 1:1.

FEATURES
• Compatible with diesel fuel types 1 and 2.
• Corrosion-resistant plating.
• Stainless steel options available - consult factory.
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Optional spring ranges to 227.5 bar (3300 psi).
• Hardened spool and cage for long life.
• Industry-common size.

RATINGS:
Maximum Rated Pressure at Supply Port: 345 bar (5000 psi)
at ports 1 and 2;
   68.9 bar (1000 psi) at port 3; 241 bar (3500 psi) max for F and H Adjustment options
   Optional screen at port 2 adds 1.73 bar (25 psi) @ 22.7 lpm (6 gpm) and 2.41 bar (35 psi)
   @ 30.31 lpm (8 gpm).
Proof Pressure: 48.2 bar (7000 psi) at ports 1 and 2;
   68.9 bar (1000 psi) at port 3

Burst Pressure: 1034 bar (5000 psi)
Regulated Pressure Range: 10.3–227.5 bar (150–3300 psi)
Flow: up to 72 lpm (19 gpm); see performance chart
Internal Leakage: to port 3: 82 ml/minute (5 cu. in/minute) maximum
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with fluorocarbon seals;
   -54° to 107°C (-65°F to 225°F) with polyurethane seals
Filtration: Compatible with ISO Classification 19 (25 µm), NAS classification
Fluids: For use with common diesel fluids

Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-BM; See page 8.650.1

PERFORMANCE:

PR50-38  Performance Chart

 

PR50-38  Performance Chart

DIMENSIONS:
PR50-38 Valve Dimensions

MATERIALS:

Cartridge: Weight: 0.27 to
0.31 kg (0.59 to 0.69 lb) depending on adjustment type; Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and TFE back-ups standard. Anodized aluminum knob.

Standard Ported Body: Weight: 0.36 kg (0.80 lb); Anodized high-strength aluminum alloy, rated to 207 bar (3000 psi); Ductile iron (code ‘D’) bodies are required for operation over 207 bar (3000 psi), dimensions may differ.
See page 8.010_3w.

Adjustment Option Details:
See page 6.003.1
  ORDERING CHART:

PR50-38 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for PR50-38 Request a quote.