- Services & Support
- Sales & Distribution
Pressure Control Valves
PR50-36 — Pressure Reducing/Relieving, Pilot-Operated,
Selection guide - similar valves.|
PDF file of this page.
STP file for PR50-36.
Request a quote.
U.S. Patent 7,137,406
A screw-in, cartridge-style, pilot-operated, spool-type, hydraulic pressure
reducing/relieving valve with internal pilot and internal spring chamber drain,
designed to act as a pressure-regulating device for secondary circuits.
With inlet pressure at port 2, the PR50-36 will regulate a reduced pressure at
port 1 based on an adjustment setting. Once regulated pressure at port 1 is
attained, the cartridge shifts to restrict flow at port 2 to maintain regulated pressure.
The spool will shift to vent excess pressure from port 1 to port 3. Pressure at port 3
is additive to the valve setting at a 1:1 ratio. Pressure at port 1 is additive to the valve
setting at a 1:1 ratio.
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Optional spring ranges to 345 bar (5000 psi).
• Hardened spool and cage for long life.
• Industry-common size.
Operating Pressure: 345 bar (5000 psi) at ports 1 and 2; 69 bar (1000 psi) at Port 3
Proof Pressure: 483 bar (7000 psi)
Burst Pressure: 965 bar (14000 psi)
Flow: up to 56 lpm (15 gpm); see performance chart
Maximum Pilot Flow and Leakage: 0.170 lpm (0.045 gpm) w/maximum adjustment
setting and with inlet pressure of 241 bar (3500 psi)
Pilot Orifice: Pilot-operated through 0.51 mm (0.020 inch) hole
Standard Spring Ranges (Reducing Function): 27.6 to 103.4 bar (400 to 1500 psi);
103.4 to 206.9 bar (1500 to 3000 psi); 206.9 to 344.8 bar (3000 to 5000 psi)
Temperature: -54° to 107°C (-65°F to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3; See page 9.110_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3P-BM; See page 8.650.1
Cartridge: Weight with adjustment options F and H: 0.25 kg. (0.55 lbs.) With adjustment option A: 0.26 kg (0.57 lb.) With adjustment option B: 0.28 kg (0.62 lb.) With adjustmnet options C and L: 0.30 kg. (0.66 lb.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Polyurethane O-rings and Fluorocarbon back-ups standard. Anodized aluminum knobs and caps.
Standard Ported Body: Weight: 0.64 kg.
(1.41 lbs.); Ductile Iron (code "D")
standard, consult factory for weight, dimensions may differ. R ated to 345 bar
(5000 psi). See page 8.010_3w.
Adjustment Option Details:
See page 6.003.1
|Selection guide - similar valves.
||PDF file of this page.||STP file for PR50-36||Request a quote.|