Pressure Control Valves

ER10-S30— Pressure Reducing Spool-Type Logic Valve
  Selection guide - similar valves.
  PDF file of this page.
  STP file for ER10-S30.
  Request a quote.

ER10-S30 Valve

ER10-S30 Valve symbol


A screw-in, cartridge-style, spool-type, spring-biased, pressure-reducing
logic element.

The ER10-S30 acts as the pressure-reducing element when used in conjunction with a pilot
relief valve connected to port 3. The outlet - port 1 - is connected to the spring chamber and
port 3 through the orifice in the spool. When the pilot relief valve is closed, the pressure-reducing
element is completely open and allows oil to flow from the inlet at port 2 to the outlet at port 1 with
minimum pressure drop. On attainment of a pre-determined pressure at port 1, the spool shifts to
increase pressure drop between 2 and 1, thereby reducing and maintaining pressure at port 1 equal
to the preset pilot pressure at port 3.

• Spring-biased, spool type logic element
• For use in conjunction with a pilot relief valve
• Hardened spool and cage for long life.
• Corrosion-resistant plating option available.
• Industry-common size.

Operating Pressure: 345 bar (5000 psi); Polyurethane seals are recommended
   for operation up to 345 bar (5000 psi); Aluminum bodies are rated up to 241 bar
  (3500 psi).
with polyurethane seals
Proof Pressure: 390 bar (5700 psi)
Flow: up to 68 lpm (18 gpm); see performance chart
Pilot Flow: 5.3 lpm (1.4 gpm) maximum
Bias Spring: 6.9 bar (100 psi)
Temperature: -40 to 100°C (-40 to 212°F) with Buna seals;
   -26 to 204°C (-15 to 400°F) with fluorocarbon seals;
   -54 to 107°C (-65 to 225°F) with polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-S3; See page 9.110_3w
Cavity Tool: CT10-S3xx; See page 8.600.1
Seal Kit: SK10-S3x-MM; See page 8.650.1




ER10-S30 Flow-Pressure



ER10-S30 Valve Dimensions



Cartridge: Weight: 0.27 kg (0.60 lb);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard. Polyurethane seals are recommended for operation over 241 bar (3500 psi).

Standard Ported Body:
Weight: 1.27 kg (2.82 lb) Ductile iron, rated to
350 bar (5075 psi). Aluminum bodies, rated to
207 bar (3000 psi) also available; weight 0.49 kg. (1.08 lb.); dimensions may differ.
See page 8.010_3w.



MP10-21 Ordering Chart

Selection guide - similar valves.
PDF file of this page. STP file for ER10-S30 Request a quote.