Valves - Electro-proportional Controls - Non-Compensated - 2-Position 2-Way - Normally Closed - Poppet Type - Restrictive Reverse Flow

SP12-20

PROPORTIONAL SOLENOID VALVE 2 PORT, NORMALLY CLOSED

Overview

Description

A solenoid-operated, 2-way, normally closed,poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications.

Operation

When de-energized, the sp12-20xx acts as a check valve, allowing flow from 1 to 2,while blocking flow from 2 to 1. When energized, the poppet lifts to open the 2 to 1 flow path.

Features

  • Continuous-duty rated coil.
  • Efficient wet-armature construction.
  • Manual override option.
  • Optional waterproof E-Coils rated up to IP69K.
  • Industry common cavity.
  • Metering option.
Pressure Ratings
Pressure rating:
  • 250 bar (3625 psi)
Proof pressure:
  • 345 bar (5000 psi)
Burst pressure:
  • 779 bar (11300 psi)
Maximum recommended pressure drop:
  • 207 bar (3000 psi)
Flow Ratings
Flow rating:
  • See performance graphs
Maximum internal leakage:
  • 5 drops/min At 207 bar (3000 psi)
Hysteresis:
  • ≤10% At maximum control curent for flow from 0 to 5.7 lpm (0 to 1.5 gpm) for the standard poppet and 0 to 56.8 lpm (0 to 15 gpm) for the 'A' metering poppet
Temperature Ratings
Operating fluid temperature:
  • -40 to 100 °C (-40 to 212 °F) With Buna N seals
  • -26 to 204 °C (-15 to 400 °F) With Buna N seals
  • -40 to 100 °C (-40 to 212 °F) With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature:
  • -40 to 70 °C (-40 to 160 °F)
Ambient temperature:
  • -40 to 70 °C (-40 to 160 °F)
Environmental Ratings
Corrosion Protection:
  • 960 hr salt spray per ASTMB117
Fluids:
  • Mineral based or synthetic hydraulic fluid with lubricating properties.
Fluid viscosity range:
  • 7.4 TO 420 cSt
Maximum operating contamination level:
  • 20/18/14 PER ISO 4406
Unit weight:
  • 0.24 kg (0.52 lb)
Internal wetted surface area:
  • 174 cm² (27.0 in²)
Valve inductance:
  • 188.8 mH At 1.2 A
Maximum control current:
  • 1.2 A 12 V coil
Threshhold current:
  • 0.30 to 0.50 A For standard poppet
  • 0.22 to 0.50 A For 'A' metering poppet
Dither PWM frequency:
  • 100 Hz
SP12-20_Perf_Chrt1(2022-02-24) SP12-20_Perf_Chrt2(2022-02-24)
SP12-20_Dim_Dwg(2022-02-24)
Cavity:
Cartridge installation torque:
  • 44.9 to 50.3 N-m (33 to 37 ft-lb)
Maximum allowable torque:
  • 61 N-m (45 ft-lb)
Coil nut torque:
  • 6.8 to 9.5 N-m (5 to 7 ft-lb)
Orientation restrictions:
  • None
SP12-20_Order(2022-02-24)

Model Options

SP12-20DEG-H-J-L
D Poppet Metering
CODE
DESCRIPTION
A
Linear Poppet Metering
BLANK
Standard Poppet Metering
E Manual Override
CODE
DESCRIPTION
BLANK
NONE
J
Momentary Pull Override, #10-32 threads
M
Two Position Override, Red Knurled Knob
T
Variable Position Override, Red Knurled Knob
Y
Momentary Pull Override, Red Knurled Knob
G Screen
CODE
DESCRIPTION
BLANK
NONE
S
100 Mesh Screen
H Line Body
CODE
DESCRIPTION
0
No Body
10T
Aluminum SAE 10
12T
Aluminum SAE 12
16T
Aluminum SAE 16
12TD
Ductile Iron SAE 12
16TD
Ductile Iron SAE 16
8B
Aluminum BSPP 1" (8)
8BD
Ductile Iron BSPP 1" (8)
J Seal
CODE
DESCRIPTION
N
Buna-N
V
Fluorocarbon
P
Polyurethane
U
PPDI Urethane
L Coil
CODE
DESCRIPTION
0
No Coil
10DG
10 VDC, D-Coil, DIN 43650
10DL
10 VDC, D-Coil, Dual Lead Wires
10DS
10 VDC, D-Coil, Dual Spade
10EL
10 VDC, E-Coil, Dual Lead Wires
10ER
10 VDC, E-Coil, Deutsch
12DG
12 VDC, D-Coil, DIN 43650
12DL
12 VDC, D-Coil, Dual Lead Wires, 18 inches long
12DL/36
12 VDC, D-Coil, Dual Lead Wires, 36 inches long
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
12DR
12 VDC, D-Coil, Deutsch
12DS
12 VDC, D-Coil, Dual Spade
12EG
12 VDC, E-Coil, DIN 43650
12EJ
12 VDC, E-Coil, AMP Jr.
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
12ER
12 VDC, E-Coil, Deutsch
12EY
12 VDC, E-Coil, Metri-Pack 150
20DS
20 VDC, D-Coil, Dual Spade
20ER
20 VDC, E-Coil, Deutsch
24AG
24 VDC, D-Coil, DIN 43650
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
24DG
24 VDC, D-Coil, DIN 43650
24DL
24 VDC, D-Coil, Dual Lead Wires
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
24DR
24 VDC, D-Coil, Deutsch
24DS
24 VDC, D-Coil, Dual Spade
24EG
24 VDC, E-Coil, DIN 43650
24EJ
24 VDC, E-Coil, AMP Jr.
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
24ER
24 VDC, E-Coil, Deutsch
24EY
24 VDC, E-Coil, Metri-Pack 150
36DS
36 VDC, D-Coil, Dual Spade