Electro-Proportional Valves — Directional Control

SPCL10-40 — Poppet-Type, 4-Port, Normally Closed
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

SPCL16-40 Valve

SPCL16-40 Valve symbol
A solenoid-operated, 4-port, normally-closed, proportional, poppet-type, screw-in
hydraulic cartridge valve for low-leakage blocking and load-holding applications.

When the SPCL10-40 is energized, the poppet lifts to allow flow from port 4 to ports 1, 2, and 3.
Flow at ports 2 and 3 is typical for load sensing applications and includes a check valve for isolation.

• Industry-common cavity.
• Continuous-duty rated coils.
• Reduce manifold space claim.
• Efficient wet-armature construction.
• Optional waterproof E-Coils rated up to IP69K.

Operating Pressure: 250 bar (3625 psi)
Proof Pressure: 345 bar (5000 psi)
Burst Pressure: 779 bar (11300 psi)
Flow Rating: See performance chart
Maximum Internal Leakage at 250 bar (3625 psi): Ports 1 and 4: 5 drops/minute max. Ports 2 and 3: 10 drops/minute max. at 250 bar (3625 psi)
Operating Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna N seals;
   -26 to 204 °C (-15 to 400 °F) with fluorocarbon seals;
   -54C to 104 °C (-65 to 225 °F) with polyurethane seals
Valve Inductance: 173.3 mH at 1.2A
Threshold Current: 0.30A to 0.45A
Hysteresis: Less than 10% of maximum flow at Max. Control Current)
Dither Frequency: 100 Hz recommended
Installation: No restrictions; See page 9.020.1
Filtration:See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Cavity: VC10-4B; See page 9.110.1
Cavity Tool: CT10; See page 8.600.1
Seal Kit: SK10-4X-MMM; See page 8.650.1
Coil Nut: Part No. 7004400


SPCL16-40 performance charts

SPCL16-40 performance charts



SPCL16-40 Valve Dimensions


Cartridge: Weight: 0.21 kg
(0.46 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N
O-rings and polyester elastomer back-up standard.

Standard D-Coil: Weight: 0.27 kg
(0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_10-size.

E-Coil: Weight: 0.41 kg (0.9 lb); Fully encapsulated with rugged external metal shell. Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.

SPCL16-40 Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.