Valves - Electro-proportional Controls - 3-Position 4-Way - Closed Center

HSP10-47C

PROPORTIONAL CARTRIDGE VALVE SPOOL, 4-PORT, 3-POSITION

Overview

Description

The HSP10-47CX is a high pressure, proportional, 4 port, 3 position, spool type, screw-in, cartridge style, hydraulic solenoid valve.

Operation

When de-energized, the HSP10-47CX blocks all ports. When s1 coil is energized, flow is allowed from 3 to 4, and from 2 to 1. When s2 coil is energized, flow is allowed from port 3 to 2, and from 4 to 1. In circuits where work port flows are unequal due to cylinder ratios, the higher return flow should be directed to port 4.

Manual Override Operation

For normal valve operation (neutral) the manual override pin must be seated in the center detent groove (id groove on knob is in-line with top of coil nut). To shift the valve manually from neutral to activate coil s1 function the knob is pushed down slightly and rotated 90ı$ˇ counterclockwise and pulled. To detent in this position rotate the knob an additional 90ı$ˇ counterclockwise to lock in the upper detent groove. To shift manually from neutral to activate coil s2 function the knob is push down all the way. To detent in this position rotate the knob 90ı$ˇ clockwise to lock in the lower detent groove. The manual override feature is intended for emergency use, not for continuous operation.

Features

  • Industry-common cavity.
  • Continuous-duty rated coil.
  • Efficient wet-armature construction.
  • Waterproof E-Coils rated up to IP69K.
  • Patented high strength solenoid tube
  • 960 hour salt-spray rated solenoid tubes.
  • All HyPerformance products are tested to NFPA specification T2.6.1.
  • and are tested at a verification level of 90% and an assurance of 99%
Pressure Ratings
Pressure rating:
  • 350 bar (5075 psi)
  • 420 bar (6090 psi) 10% cycle life
Proof pressure:
  • 690 bar (10.000 psi)
Burst pressure:
  • 1380 bar (20.000 psi)
Flow Ratings
Maximum internal leakage:
  • 164 ml/min (10 in³/min) Port 3-1 at de-energized 350 bar (5075 psi)
Hysteresis per cent:
  • 10 % Of flow rating between 3.8 to 20.8 lpm (1.0 to 5.5 gpm)
Other Ratings
Cycle life:
  • One million cycles
Temperature Ratings
Operating fluid temperature:
  • -40 to 100 °C (-40 to 212 °F) With buna N seals
  • -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature:
  • -40 to 70 °C (-40 to 160 °F)
Ambient temperature:
  • -40 to 90 °C (-40 to 194 °F)
Fluids:
  • Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range:
  • 7.4 to 420 cSt
Maximum operating contamination level:
  • 18/16/13 per ISO 4406
Unit weight:
  • 0.28 kg (0.61 lb) Without coil and nut
Internal wetted surface area:
  • 245 cm² (37.97 in²)
Maximum control current:
  • 1.2 A For coil 12 Vdc
Threshhold current:
  • 0.4 A Nominal for coil s1 12 Vdc
  • 0.4 A Nominal for coil s2 12 Vdc
Dither PWM frequency:
  • 100 Hz
HSP10-47C_Perf_Chrts(2022-02-24)
HSP10-47C_Dim_Dwg(2022-02-24)
Seal kit:
  • SK10-4N-MMM Buna N
  • SK10-4V-MMM Fluorocarbon
  • SK10-4U-000 Urethane
HSP10-47C_Order(2022-02-24)

Model Options

HSP10-47CE-H-J-L
E Manual Override
CODE
DESCRIPTION
B
Momentary Push/Pull Override, 1.5" Diameter Aluminum Knob
BLANK
NONE
K
Three Position Override, 1.5" Diameter Aluminum Knob
M
Momentary Push/Pull Override, Red Knurled Knob
H Line Body
CODE
DESCRIPTION
0
No Body
8HT
Ductile Iron SAE 8
J Seal
CODE
DESCRIPTION
N
Buna-N
V
Fluorocarbon
U
PPDI Urethane
L Coil
CODE
DESCRIPTION
0E
No Coil, E-Coil Spacer
10EL
10 VDC, E-Coil, Dual Lead Wires
10ER
10 VDC, E-Coil, Deutsch
12EG
12 VDC, E-Coil, DIN 43650
12EJ
12 VDC, E-Coil, AMP Jr.
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
12ER
12 VDC, E-Coil, Deutsch
12EY
12 VDC, E-Coil, Metri-Pack 150
20ER
20 VDC, E-Coil, Deutsch
24EG
24 VDC, E-Coil, DIN 43650
24EJ
24 VDC, E-Coil, AMP Jr.
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
24ER
24 VDC, E-Coil, Deutsch
24EY
24 VDC, E-Coil, Metri-Pack 150