SYMBOL: |
DESCRIPTION
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits.
OPERATION
When de-energized, the SF08-20 acts as a check valve, allowing flow from 1 to 2, while blocking flow
from 2 to 1. When energized, the cartridge’s poppet lifts to open the 2 to 1 flow path. In this mode,
flow from 1 to 2 is severely restricted. If this path is required, see model SF08-22, page 1.042.1.
FEATURES
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Optional waterproof E-Coils rated up to IP69K.
• Industry common cavity.
• Compact size.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Flow: Up to 19 lpm (5 gpm)
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 345 bar (5000 psi)
Temperature: -54° to 104°C (-65° to 225°F) with standard polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20°C: Standard Coil: 1.2 amps at 12 VDC;
0.13 amps at 115 VAC (full wave rectified).
E-Coil: 1.4 amps at 12 VDC; 0.7 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 345 bar (5000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-2; See page 9.108.1_2w
Cavity Tool: CT08-2xx; See page 8.600.1
Seal Kit: SK08-2P-T; See page 8.650.1
Coil Nut: Part No. 7004400 |
| PERFORMANCE: 
|
|
DIMENSIONS: |
MATERIALS:
Cartridge: Weight: 0.09 kg. (0.20 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and back-ups standard.
Ported Body: Weight: 0.54 kg. (1.2 lbs.); Ductile Iron standard, rated to 345 bar
(5000 psi); Aluminum bodies available; dimensions may differ.
See page 8.008.1_2w.
Standard D-Coil: Weight each: 0.11 kg.
(0.25 lbs.); Unitized thermoplastic encapsulated, Class H high temperature magnetwire. See page 3.200.1_08-size.
E-Coil: Weight: 0.14 kg. (0.3 lbs.); Perfect wound, fully encapsulated with rugged
external metal shell; Rated up to IP69K
with integral connectors.
See page 3.400.1_08-size. |
|
ORDERING CHART:
|
|
|
