SYMBOL: |
DESCRIPTION
A solenoid-operated, 2-way, normally open, piloted poppet-type, screw-in hydraulic cartridge valve designed for low leakage in load-holding or blocking applications.
OPERATION
When de-energized, the SV12-21 allows flow from 2 to 1, while flow from 1 to 2 is severely restricted. When energized, the valve closes, blocking flow from 2 to 1. In this mode, flow from 1 to 2 will be allowed after overcoming the solenoid force. This requires 3.4 to 10.3 bar (50 to 150 psi).
For bi-directional capability, see model SV12-23, page 1.054.1.
Operation of Manual Override Option: To override, push and hold override button.
FEATURES
• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Cost-effective cavity.
RATINGS
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 345 bar (5000 psi)
Flow: Up to 113.6 lpm (30 gpm)
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 240 bar (3500 psi)
Temperature: -40° to 100°C (-40° to 212°F) with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Response Time: First indication of change of state with 100% voltage supplied
at 80% of nominal flow rating: Energized: 110 msec. De-energized: 40 msec.
Initial Coil Current Draw at 20°C: Standard Coil: 1.67 amps at 12 VDC;
0.18 amps at 115 VAC (full wave rectified).
E-Coil: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC12-2; See page 9.112.1_2w
Cavity Tool: CT12-2xx See page 8.600.1
Seal Kit: SK12-2x-T; See page 8.650.1
Coil Nut: Part No. 7004420 |
| PERFORMANCE: 
|
|
DIMENSIONS: |
MATERIALS:
Cartridge: Weight: 0.25 kg. (0.55 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-up standard.
Standard Ported Body: Weight: 0.57 kg. (1.25 lbs.); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions
may differ. See page 8.012.1_2w.
Standard D-Coil: Weight each: 0.27 kg.
(0.60 lbs.); Unitized thermoplastic encapsulated, Class H high temperature magnetwire. See page 3.200.1_10-size.
E-Coil: Weight: 0.41 kg. (0.9 lbs.); Perfect wound, fully encapsulated with rugged
external metal shell; Rated up to IP69K
with integral connectors.
See page 3.400.1_10-size. |
|
ORDERING CHART:
|
|
|
