Solenoid-Operated On/Off Valve HyPerformance™

HSV12-28 — Bi-Directional Blocking, Poppet, 2-Way,
Normally Closed
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV12-28 Valve

SYMBOL:HSV12-28 Valve symbol
A solenoid-operated, two-way, normally closed, internally piloted, poppet-type,
bi-directional, screw-in hydraulic cartridge valve, designed to function as a
load-holding or blocking valve in applications requiring low internal leakage

When de-energized, the HSV12-28 blocks flow in both directions.
When energized, the valve’s poppet opens to allow bi-directional flow.

• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Cost-effective cavity.
• 1000-hour salt-spray rated solenoid tubes and coils.
• All HyPerformance products are tested to NFPA specification T2.6.1
  and are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
   Note: all HyPerformance products are tested for 900K cycles at 350 bar and
   100K cycles at 420 bar.
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: Up to 114 lpm (30 gpm)
Internal Leakage: 7 drops per minute maximum at 350 bar (5075 psi)
Temperature: -54 to 107°C (-65 to 225°F) with standard urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: E-Coil: 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage: 85% of nominal at 350 bar (5075 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC12-2; See page 9.112.1_2w
Cavity Tool: HCT12-2xx; See page 8.600.1
Seal Kit: SK12-2x-M; See page 8.650.1
Coil Nut: Part No. 7004400




HSV12-28 Valve Performance Chart



HSV12-28 Valve Dimensions



Cartridge: Weight: 0.28 kg (0.61 lb) Steel
with hardened work surfaces. Zinc-plated
exposed surfaces. Urethane seals without
back-up rings standard.

Ported Body: Weight: 2.62 kg (1.18 lb)
H-series ductile iron. Rated to 345 bar
(5000 psi). See page 8.012.1_2w.

E-Coil: Weight: 0.41 kg (0.9 lb); Fully
encapsulated with rugged external metal
shell. Rated up to IP69K with integral
connectors. See page 3.400.1_10-size.



HSV12-28 Ordering Chart 10-size E-Coil