Solenoid-Operated On/Off Valve

SV08-58D — 5-Way, 3-Position, Motor Spool, with Load Sense
  Selection guide - similar valves.
  PDF file of this page.
  STP file for SV08-58D.
  Request a quote.

SV08-58C Valve

SV08-58D Valve symbol
A solenoid-operated, 5-way, 3-position, motor-spool-type, screw-in hydraulic cartridge valve with integral load sense port.

When de-energized, the SV08-58D blocks inlet flow at port 5 while load sense at port 1 is vented to port 3, and ports 2 and 4 are connected to port 3. When coil #1 is energized, flow is allowed from 5 to 2 and from 4 to 3. When coil #2 is energized, flow is allowed from 5 to 4 and from 2 to 3. Load sense at port 1 is connected to port 5 when spool is in the shifted positions.

• Continuous-duty rated solenoid.
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Optional waterproof E‑Coils rated up to IP69K.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Compact size.

Operating Pressure: 241 bar (3500 psi)
Proof Pressure: 345 bar (5000 psi)
Flow: Up to 13.3 lpm (3.5 gpm)
Internal Leakage: 197 cc/minute (12 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100deg;C (-40deg; to 212deg;F) with Buna seals;
   -26deg; to 204deg;C (-15deg; to 400deg;F) with Fluorocarbon seals;
   -54deg; to 104deg;C (-65deg; to 225deg;F) with Polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20° C: Standard Coil: 1.2 A at 12 Vdc;
   0.13 A at 115 Vac (full wave rectified).
   E‑Coil: 1.4 A at 12 Vdc; 0.7 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC08-5; See page 9.108.1_5 w
Cavity Tool: CT08-5xx; See page 8.600.1
Seal Kit: SK08-5x-MMMM; See page 8.650.1
Coil Nut: Part No. 7004400
Coil Spacer: Std D-Coil Spacer Part No. 7012940; E‑Coil Spacer Part No. 4534720;
If cartridge is ordered "Less Coil," D-Coil spacer will be provided unless an E is specified
in the Coil Termination To Order section


SV08-58D performance graphs


SV08-58D Valve Dimensions


Cartridge: Weight: 0.15 kg (0.34 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and back-ups standard.

Standard Ported Body: Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.
See page 8.008.1_5 w.

Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.
See page 3.200.1_08-size.

E‑Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_08-size.

SV08-58D Ordering Chart 10-size E‑Coil

Selection guide - similar valves.
PDF file of this page. STP file for SV08-58D. Request a quote.