HydraForce Logo

Solenoid-Operated On/Off Valve

SV80-61 — Spool-Type, 2-Position, 6-Way, Selector Valve

Selection guide - similar valves.
PDF file of this page.
STP file for SV80-61.
Request a quote.


SV80-61 Valve

SYMBOL:SV80-61 Valve symbol

DESCRIPTION
A solenoid-operated, 2-position, 6-way, spool-type, direct-acting, screw-in hydraulic valve
for selector circuits or series/parallel drive circuits.

OPERATION
When de-energized, the SV80-61 blocks flow to 5 and 6, and allows flow between
four and 3, and between 1 and 2. When energized, the spool shifts to block flow to
ports 2 and 3, while allowing flow between 4 and 5, and between 1 and 6.
Note: In circuits where this valve is used as a selector valve to direct flow between
two cylinders of unequal area ratios, the cylinder head sides should be connected to
ports 3 and 5, and the rod sides to ports 2 and 6.

FEATURES
• Hardened precision spool and cage for long life.
• Optional coil voltages and terminations.
• Heavy-duty waterproof E-Coils rated up to IP69K.
• Continuous-duty rated coil.
• Cartridges are voltage interchangeable.

RATINGS
Operating Pressure: 207 bar (3000 psi) with standard Buna N seals
Flow: Up to 7.6 lpm (2 gpm)
Internal Leakage: 164 ml/minute (10 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
-26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-6; See page 9.110.1_6w
Cavity Tool: CT10-6xx See page 8.600.1
Seal Kit: SK10-6x-MMMMM; See page 8.650.1
Coil Nut: Part No. 7004400

PERFORMANCE:

SV80-61 Valve Performance Chart


DIMENSIONS:
SV80-61 Dimension Drawing


MATERIALS:

Cartridge: Weight: 0.36 kg. (0.8 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and back-ups standard.

Standard Ported Body: Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); See page 8.010.1_6w.

E-Coil: Weight: 0.14 kg. (0.3 lbs.); Perfect wound, fully encapsulated with rugged
external metal shell; Rated up to IP69K
with integral connectors.
See page 3.400.1_08-size.

 

ORDERING CHART:

SV80-61 Ordering Chart


Selection guide - similar valves.
PDF file of this page. STP file for SV80-61. Request a quote.

Home | About HF | Browse Products | Find a Valve by Model No. | Literature | Support | Distribution | i-Design | Training | Careers
Copyright 2011 HydraForce, Inc. All rights reserved.