Electro-Proportional Valves — Flow Control HyPerformance™

HSPEC16-30 — Proportional Flow Control Vave
with Integral Compensator
  Features and Benefits
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSPEC16-30 Valve

SYMBOL:HSPEC16-30 Valve symbol


A high pressure, proportional, solenoid-operated, 3-way, normally-closed, flow control, screw-in
hydraulic cartridge valve intended for post-compensated applications with load-sense systems. In post-
compensated systems, the load-sense port 1 of the HSPEC16-30 valve is connected to the highest
load, which maintains flow sharing when flow demand exceeds flow supply. Pressure compensation
value of the valve defined as pressure difference between inlet and load sense ports is provided by
appropriate setup of a pump load sense control or by additional pressure compensator valve, one for
the whole system, in case the pump is non-adjustable.

When de-energized, the HSPEC16-30 blocks flow from port 3 to port 2. The valve will regulate flow out
of port 2 regardless of load pressure with flow rate proportional to current applied to the solenoid.

• Industry-common cavity.
• Continuous-duty rated coils.
• Reduced manifold space claim.
• Efficient wet-armature construction.
• Optional waterproof E-Coils rated up to IP69K.
• Flow sharing possible
• All HyPerformance™ valves are tested to the rigorous standards of NFPA specification T2.6.1 and
  are tested at a verfication level of 90% and an assurance of 99%

Operating Pressure: 350 bar (5075 psi); 10% cycle life; 420 bar (6090 psi)
   Note: All HyPerformance™ products are tested for 900K cycles at 350 bar and 100K at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1241 bar (18000 psi)
Flow: 132 lpm (35 gpm) at 220 psi (15 bar) compensation value; 102 lpm
   (27 gpm) at 160 psi (11 bar) compensation value.
Internal Leakage: Port 3 to port 2 or port 1 to port 2: 7 drops/minute with
   350 bar (5075 psi) at port 3.
Temperature: -54° to 107°C (-65° to 225° F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC16-3SPEC; See page 9.116.1_3w
Cavity Tool: HCT16-3SPEC; See page 8.600.1
Seal Kit: SK16-3U-0; See page 8.650.1




HSPEC16-30 Performance graph 1


HSPEC16-30 Performance graph 1


HSPEC16-30 Valve Dimensions


Cartridge: Weight: 0.53 kg (1.17 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces. PPDI urethane seals without back-up rings standard.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.

Ported Body: Weight: 6.85 kg (15.07 lb);
H-Series ductile iron standard. Rated to 345 bar (5000 psi). See page 8.016.1_3w.



HSPEC16-30 Ordering Chart