Valves - Directional Controls - Piloted Directional Valve - 2-position 3-way

HPD16-S50

PILOTED DIRECTIONAL VALVE

Overview

Description

The HPD16-S50X is a high pressure, spool type, screw-in, cartridge style, pilot operated, hydraulic directional valve

Operation

In the neutral position flow is allowed between ports 3 and 2 bidirectionally while port 4 is blocked. On remote pilot signal at port 1 the valve's spool shifts to block port 2 while opening flow between ports 3 and 4 bidirectionally. The spring chamber is vented to the tank through port 5. The vented spring chamber allows the valve to be fully pressurized at ports 1, 2, 3 and 4 without affecting required pilot pressure. Pressure at port 5 will increase the required pilot pressure at a 1:1 ratio

Features

  • Hardened spool and cage for long life.
  • All HyPerformance™ products are tested to the rigorous standards of the NFPA specification T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

Ratings

Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) 10% cycle life
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
114 lpm (30 gpm) Spring option 100, n/v/u seal option
95 lpm (25 gpm) Spring option 100, ns/vs/us seal option
151 lpm (40 gpm) Spring option 150
Maximum internal leakage
246 ml/min (15 in³/min) HPD16-S50, ports 3-4 at and 350 bar (5075 psi) 32 cSt
410 ml/min (25 in³/min) HPD16-S50, ports 3-2 at and pilot pressure 350 bar (5075 psi) 32 cSt 350 bar (5075 psi)
328 ml/min (20 in³/min) Hpd16-s50n, ports 3-4 at and 350 bar (5075 psi) 32 cSt
492 ml/min (30 in³/min) Hpd16-s50n, ports 3-2 at and pilot pressure 350 bar (5075 psi) 32 cSt 350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) Buna N
-26 to 204 °C (-15 to 400 °F) Fluorocarbon
-54 to 107 °C (-65 to 225 °F) Urethane
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Cartridge weight
0.8 kg (1.75 lb)
Internal wetted surface area
510.0 cm² (79.0 in²)

Performance

HPD16-S50_Chrt

Dimensions

HPD16-S50_Dim

Materials

Materials

Cartridge: Weight: 0.80 kg. (1.75 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces; PPDI Urethane seals without backup rings standard.

Ported Body : Weight: 8.09 kg (17.79 lbs) H-series ductile iron standard. Rated to 345 bar (5000 psi).

Installation Specifications

Cavity
Hvc16-s5
Cartridge installation torque
298 to 311 N-m (220 to 230 ft-lb) Steel/ductile iron cavity
237 to 250 N-m (175 to 185 ft-lb) aluminum cavity
Orientation restriction
None

Accessories

Seal kit
Hsk16-s5n-bmmm Buna N
Hsk16-s5v-bmmm Fluorocarbon
Hsk16-s5u-oooo Urethane

Order code

POSITION
CODE
DESCRIPTION
HPD16-S50B-H-J-R
B
Spool Option
B
BLANK
Standard
B
N
Normally Open in Transition
H
Line Body
H
0
No Body
H
16HT
Ductile Iron SAE 16
J
Seal
J
N
Buna-N
J
NS
Buna-N with a Sealed Spool
J
V
Fluorocarbon
J
VS
Fluorocarbon with a Sealed Spool
J
U
PPDI Urethane
J
US
PPDI Urethane with a Sealed Spool
R
Spring
R
100
100 psi Bias Spring
R
150
150 psi Bias Spring
HPD16-S50_Order