Valves - Directional Controls - Piloted Proportional - 2-position 2-way

HPE16-44

PROPORTIONAL, PILOT OPERATED DIRECTIONAL VALVE

Overview

Description

The HPE16-44 is a high pressure, screw-in, cartridge-style, pilot-operated, proportional, spool-type, hydraulic directional valve

Operation

In neutral position (unpiloted) the valve blocks flow from ports 2 to 3. On remote pilot signal at port 1 the spool shifts proportionally to the applied pilot pressure to allow flow from port 2 to 3 bi-directionally. The spring chamber is vented to port 4. Pressure at port 4 will directly (1:1) affect the pilot pressure required and must be added to bias spring value

Features

  • Hardened spool and cage for long life.
  • Industry common cavity.
  • All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
  • All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

Ratings

Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) (10% cycle life)
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
95 lpm (25 gpm)
Maximum internal leakage
500 ml/min (30 in³/min) At and 350 bar (5075 psi) 32 cSt
Other Ratings
Cycle life
one million cycles
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Cartridge weight
0.82 kg (1.8 lb)
Internal wetted surface area
450 cm² (69.8 in²)

Performance

HPE16-44_Perf_Chrts

Dimensions

HPE16-44_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.82 kg. (1.8 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals without back-up rings standard.

Installation Specifications

Cavity
Hvc16-4
Cartridge installation torque
268 to 285 N-m (190 to 210 ft-lb) Steel/ductile iron cavity
237 to 250 N-m (175 to 185 ft-lb) Aluminum cavity
Orientation restriction
None

Accessories

Seal kit
SK16-4N-MMM Buna N
SK16-4V-MMM Fluorocarbon
SK16-4U-OOO Urethane

Order code

POSITION
CODE
DESCRIPTION
HPE16-44-H-J
H
Line Body
H
0
No Body
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
U
PPDI Urethane
HPE16-44_Order