Valves - Directional Controls - Piloted Proportional - 2-position 4-way

HPE42-S63

PROPORTIONAL, PILOT OPERATED DIRECTIONAL VALVE

Overview

Description

The HPE42-S63 is a high pressure, screw-in, cartridge-style, pilot-operated, normally closed, proportional, spool-type, hydraulic directional valve.

Operation

In neutral position (unpiloted) the spool blocks all flow paths. On remote pilot signal at port 1 the spool shifts proportionally to the applied pilot pressure to gradually opens flow paths from port 2 and 3 and from port 4 to 5 bidirectionally until spool is fully shifted. The spring chamber is vented to port 6. Pressure at port 6 will directly (1:1) affect the pilot pressure required and must be added to bias spring value.

Features

  • Hardened spool and cage for long life.
  • All HyPerformance products are tested to the rigorous standards of the NFPA specification T2.6.1.
  • All HyPerformance valves are tested at a verification level of 90% and an assurance of 99%.

NOTE: Orifice disc should not be used with this product.

Pressure Ratings
Pressure rating:
  • 350 bar (5075 psi)
  • 420 bar (6090 psi) (10% duty cycle)
Proof pressure:
  • 690 bar (10000 psi)
Burst pressure:
  • 1380 bar (20000 psi)
Pilot pressure required:
  • 27 bar (400 psi) Minimum to fully shift
Flow Ratings
Flow rating:
  • 170 lpm (45 gpm)
Flow ratings
Maximum internal leakage:
  • 980 ml/min (60 in³/min) At 350 bar (5075 psi) at 32 cSt
  • 1300 ml/min (80 in³/min) Outlet at port 3, inlet at port 2 and 4, test conducted with valve in unpiloted state
  • 500 ml/min (30 in³/min) Outlet at port 5, inlet at port 4, test conducted with valve in unpiloted state
Other Ratings
Cycle life:
  • One million cycles
Temperature Ratings
Operating fluid temperature:
  • -40 to 100 °C (-40 to 212 °F) With Buna N seals
  • -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature:
  • -40 to 70 °C (-40 to 160 °F)
Ambient temperature:
  • -40 to 90 °C (-40 to 194 °F)
Fluids:
  • Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range:
  • 7.4 to 420 cSt
Maximum operating contamination level:
  • 18/16/13 per ISO 4406
Unit weight:
  • 2.1 kg (4.7 lb)
Internal wetted surface area:
  • 870 cm² (135 in²)
HPE42-S63_Perf1(2022-02-24) HPE42-S63_Perf2(2022-02-24)
HPE42-S63_Dim(2022-02-24)
Cavity:
Cartridge installation torque:
  • 394 to 420 N-m (290 to 310 ft-lb) Steel/ductile iron cavity
  • 298 to 311 N-m (220 to 230 ft-lb) Aluminum cavity
Orientation restriction:
  • None
Seal kit:
  • HSK42-S6N-BMMMM Buna N
  • HSK42-S6V-BMMMM fluorocarbon
  • HSK42-S6U-OOOOO urethane
HPE42-S63_Order(2022-02-24)
POSITION
CODE
DESCRIPTION
HPE42-S63-H-J
H
Line Body
H
0
No Body
H
20HT
Ductile Iron SAE 20
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
U
PPDI Urethane