Solenoid-Operated On/Off Valve — HyPerformance™

HSV10-47D — Spool-Type, 4-Port, 3-Position, Motor Center
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV10-47D Valve

HSV10-47D Valve symbol
A solenoid-operated, 4-port, 3-position, direct-acting, spool-type, motor center,
screw-in hydraulic cartridge valve for use in high pressure, high flow applications.

When de-energized, the HSV10-47D blocks the inlet port while allowing flow from
ports 2 and 4 to port 1. When coil #1 is energized, flow is allowed from 3 to 4, and
from 2 to 1. When coil #2 is energized, flow is allowed from 3 to 2, and from 4 to 1.
Manual Override Option: The manual override feature is intended for emergency
use, not for continuous operation. For normal valve operation (neutral), the manual
override pin must be seated in the center detent groove (ID groove on knob is in-line
with top of coil nut). To shift the valve manually from neutral to activate coil S1 function,
push the knob down slightly, rotate 90 degrees counterclockwise and pull. To detent in
this position, rotate the knob an additional 90 degrees counterclockwise to lock in the
upper detent groove. To shift manually from neutral to activate coil S2 function, push the
knob down all the way to detent. In this position, rotate the knob ninety degrees clockwise
to lock in the lower detent groove.

• Manual override option.
• Unitized, molded coil design.
• Waterproof E‑Coils rated up to IP69K.
• Corrosion-resistant plating.
• Continuous-duty rated solenoid with patented, high-strength solenoid tube.
• Hardened precision spool and cage for long life.
• All ports may be fully pressurized.
• All HyPerformance™ products are tested to the rigorous standards of the NFPA specification T2.6.1.
• All HyPerformance™ valves are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
   Note: all HyPerformance™ products are tested for 900K cycles at 350 bar and
   100K cycles at 420 bar.
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: 34 lpm (9 gpm)
Internal Leakage: Ports 3-1: 35 (575 ml/min) at 350 bar (5075 psi) de-energized
Temperature: -54 to 107 °C (-65 to 225 °F) with urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1_4 w;
Cavity Tool:
HCT10-4xx; See page 8.600.1
Seal Kit: SK10-4x-000; See page 8.650.1




HSV10-47D Valve Performance Chart



HSV10-47D  Dimension Drawing



Cartridge: Weight (without coil and nut):
0.31 kg (0.68 lb); (with manual override);
0.35 kg(0.78 lb.); Steel with hardened work
surfaces. Corrosion-resistant zinc-nickel
plated exposed surfaces; urethane seals
without back-ups standard.

Standard Ported Body:
Weight: 1.71 kg (3.76 lb); H‑series ductile
iron standard. Rated to 350 bar (5075 psi).
See page 8.010.1_4 w.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect
wound, fully encapsulated with rugged
external metal shell; Rated up to IP69K
with integral connectors.
See page 3.400.1_10-size.



HSV10-47D Ordering Chart 10-size E‑Coil