Cartridge Valves - Pressure Control Valves - Pressure relief

VSPX-12A

RE18318-14-01(2023-11-24)
Description

Flow is blocked from 1 to 2 until pressure increases to meet the selected valve setting, lifting the conical, pilot-stage poppet from its seat. This action exhausts oil above the main-stage piston (spool type), allowing it to shift and provide relief flow through 2 to tank. Pressure at 2 is additive to the reliefsetting of the valve. With port 3 fully drained to tank, the minimum relief setting of 2 bar (30 psi) is attained. To use the remote control feature, pressure at 3 may be varied externally in control of the main relief setting up to the selected maximum spring adjustment.

¹) Measured at 200 bar (2900 psi)

²) Only external seals for 10 valves

General
Max. operating pressure port 1 (P) and 2 (T):
  • 350 bar (5000 psi)
Max. pressure admitted port 3 (Y):
  • 350 bar (5000 psi)
Flow range:
  • 5 - 200 l/min (1.3 - 53 gpm)
Max. internal leakage¹):
  • 350 cm³/min. (21 cu.in./min.)
Fluid temperature range:
  • -30 to 100 °C (-22 to 212 °F)
Installation torque:
  • 81 - 95 Nm (60 - 70 ft-lbs)
Weight:
  • 0.3 kg (0.66 lbs)
Cavity:
  • CA-12A-3C (see data sheet 18325-70)
Lines bodies and standard assemblies:
  • Please refer to section “Hydraulic integrated circuit” or consult factory
Seal kit²):
  • Code: RG12A9010520100
  • material no: R901111379
Fluids:
  • Mineral-based or synthetics with lubricating properties at viscosities of 10 to 500 mm²/s (cSt)
Recommended degree of fluid contamination:
  • Nominal value max. 10μm (NAS 8) / ISO 4406 19/17/14
Installation position:
  • No restrictions
Other Technical Data:
  • See data sheet 18350-50
RE18318-14-02(2023-11-24)
RE18318-14-order(2023-11-24)
RE18318-14-dim(2023-11-24)