Cartridge Valves - Pressure Control Valves - Pressure Reducing and Relieving

VRPX-10A

RE18318-56-01(2023-11-24)
Description

Initially, flow passes freely from 2 to 1. When the pressure at 1 exceeds the pressure setting, the conical poppet in the upper, pilot stage is lifted from its seat. This allows the main-stage piston to shift, restricting input flow at 2. This increases the pressure drop through the valve and maintains consistent pressure at 1. The spring chamber is drained at 3 to prevent a build-up of back-pressure against the spool. Additionally, if pressure at 1 rises above the pressure setting, flow is relieved to 3 until the setting is re-attained.

¹) Standard version X=03 type

²) Only external seals for 10 valves

General:
Max. operating pressure port 2 (P):
  • 350 bar (5000 psi)
Max. pressure admitted port 1 (A):
  • 280 bar (4000 psi)
Max. flow:
  • 60 l/min (16 gpm)
Standard internal pilot orifice diameter:
  • 0.6 mm
Fluid temperature range:
  • -30 to 100 °C (-22 to 212 °F)
Installation torque:
  • 41 - 47 Nm (30 - 35 ft-lbs)
Weight¹):
  • 0.2 kg (0.44 lbs)
Cavity:
  • CA-10A-3N (see data sheet 18325-70)
Lines bodies and standard assemblies:
  • Please refer to section “Hydraulic integrated circuit” or consult factory
Seal kit²):
  • Code: RG10A3010520100
  • material no: R901111369
Fluids:
  • Mineral-based or synthetics with lubricating properties at viscosities of 10 to 500 mm²/s (cSt)
Recommended degree of fluid contamination:
  • Nominal value max. 10μm (NAS 8) / ISO 4406 19/17/14
Installation position:
  • No restrictions
Other Technical Data:
  • See data sheet 18350-50
RE18318-56-02(2023-11-24)
RE18318-56-order(2023-11-24)
RE18318-56-dim(2023-11-24)