Valves - Solenoid on/off Controls - 2-Position 2-Way - Poppet Type - Normally Open - Bidirectional Blocking

HSV10-29

高压电磁阀,试制,双向,波佩特型,正常打开

概述

描述

HSV10-29X 是一种高压双向、导引式、弹出式、通常打开式、双向式、螺杆式液压墨盒阀,设计用于在需要双向低内部泄漏的应用中充当负载保持或阻塞阀。

操作

去活力时,HSV10-29X 允许双向流动。通气时,阀块双向流动。

手动覆盖操作

要手动移动阀门,按下手动覆盖按钮/旋钮。注意:手动覆盖功能用于紧急用途,而不是用于连续操作。

特征

  • 连续值班额定线圈。
  • 硬化座椅寿命长,泄漏率低。
  • 可选线圈电压和终止。
  • 高效的湿臂结构。
  • 墨盒可互换电压。
  • 防水电子线圈的额定值高达 IP69K。
  • 统一成型线圈设计。
  • 960小时盐喷雾额定电磁阀管和线圈。
  • 所有 Hy 性能产品均经过 NFPA 规范 T2.6.1 的测试,验证级别为 90%,保证为 99%。

评级

Pressure Ratings
Pressure rating:
  • 350 bar (5075 psi)
  • 420 bar (6090 psi) 10% cycle life
Proof pressure:
  • 690 bar (10000 psi)
Burst pressure:
  • 1380 bar (20000 psi)
Flow Ratings
Flow rating:
  • 75.7 lpm (20 gpm)
Maximum internal leakage:
  • 5 drops/min With 350 bar (5075 psi)
Other Ratings
Cycle life:
  • One million cycles
Temperature Ratings
Operating fluid temperature:
  • -40 to 100 °C (-40 to 212 °F) With buna N seals
  • -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature:
  • -40 to 70 °C (-40 to 160 °F)
Ambient temperature:
  • -40 to 90 °C (-40 to 194 °F)

操作参数

Fluids:
  • Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range:
  • 7.4 to 420 cSt
Maximum operating contamination level:
  • 18/16/13 per ISO 4406

性能

Unit weight:
  • 0.18 kg (0.4 lb)
Internal wetted surface area:
  • 161 cm² (24.9 in²) HSV10-29
  • 163 cm² (25.2 in²) HSV10-29P/29K

性能

HSV10-29_Perf

尺寸

HSV10-29_Dim

材料

材料

墨盒:具有硬化工作表面的钢。镀锌暴露表面;没有备份标准的聚氨酯 O 环。

移植身体:重量:1.19千克。(2.62磅);性能™导轨铁(代码"D")标准。额定为 345 酒吧 (5000 psi)。

电子线圈:重量:0.41千克。(0.9 磅);完美的伤口,完全封装与坚固的外部金属外壳:带积分连接器的额定值高达 IP69K。

安装规范

Cavity:
Cartridge installation torque:
  • 102 to 115 N-m (75 to 85 ft-lb) Steel/ductile iron cavity
  • 81 to 88 N-m (60 to 65 ft-lb) Aluminum cavity
Orientation restriction:
  • None

辅料

Seal kit:
  • SK10-2N-M Buna N
  • SK10-2V-M Fluorocarbon
  • SK10-2U-0 Urethane

订单代码

POSITION
CODE
DESCRIPTION
 
 
HSV10-A29AE-H-J-L-M
A
 
Position Sensor Option
A
29
Standard
A
P29A
Position Indicator Switch with Resticted Flow
E
 
Manual Override
E
BLANK
NONE
E
K
Momentary Push Override, Knob
E
P
Momentary Push Override, Button
H
 
Line Body
H
0
No Body
J
 
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
U
PPDI Urethane
L
 
Coil
L
0
No Coil
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20ER
20 VDC, E-Coil, Deutsch
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
M
 
Position Sensor Termination
M
BLANK
No Position Sensor
M
M3
Neutral Sense, M12-4P, Dual Output NC/NO
M
N3
Neutral Sense, DT04-4P, Dual Output NC/NO
HSV10-29_Order