Home | Products | Cartridge Valves | Solenoid Valves | SV08-30
SV08-30_Product(2022-02-24)

SV08-30

Solenoid cartridge valve spool, 3 port

SV08-30_sym_2025-09-04
STP Files Download PDF of Page Request a Quote
Expand All|Collapse All

Description

A solenoid-operated, 3 port, direct-acting, spool-type, screw-in hydraulic directional valve.

Operation

When de-energized, the SV08-30XX allows flow from port 2 to port 1, while blocking flow at port 3. When energized, the cartridges spool shifts to open from port 3 to port 2, while blocking flow out port 1. While port 1 may be fully pressurized, it is not intended to be used as the inlet.

Manual override option

For normal operation (de-energized) the manual override pin must be seated in the detent groove. To shift the valve manually, the operator pushes down on the knob and rotates 180 degrees in the counter-clockwise direction. When the manual override is actuated. Note: the manual override feature is intended for emergency use, not for continuous-duty operation.

Pressure Ratings
Pressure rating:
  • 3000 psi [207 bar]
Proof pressure:
  • 10000 psi [690 bar] SV08-30
  • 3500 psi [240 bar] SV08-30M
Burst pressure:
  • 13500 psi [930 bar] SV08-30
  • 10500 psi [725 bar] SV08-30M
Flow Ratings
Flow rating:
  • See "performance range"
Maximum internal leakage:
  • 5 in /min [82 ml/min] Tested @ 3000 psi [207 bar] (port 3) de-energized
  • 10 in /min [164 ml/min] Tested @ 3000 psi [207 bar] (port 1) energized
Temperature Ratings
Operating fluid temperature:
  • -40 °f to 212 °f [-40 °c to 100 °c] With Buna N seals
  • -15 °f to 400 °f [-26 °c to 204 °c] With fluorocarbon seals
  • -65 °f to 225 °f [-54 °c to 107 °c] With polyurethane seals
Storage temperature:
  • -40 °f to 160 °f [-40 °c to 70 °c]
Ambient temperature:
  • -40 °f to 160 °f [-40 °c to 70 °c]
Fluids:
  • Mineral based or synthetic hydraulic fluid with Lubricating properties.
Fluid viscosity range:
  • 7.4 to 420 cSt
Maximum operating contamination level:
  • 20/18/14 per ISO 4406
Corrosion protection:
  • Note: GSV08-30XX
  • 960 hr salt spray per ASTM B117
Unit weight:
  • 0.29 lb [0.13 kg]
Internal wetted surface area:
  • 15.5 in² [100 cm²]
Minimum pull in voltage:
  • Note: 12 VDC coil
  • 10.2 VDC
SV08-30_perf_2025-09-04 SV08-30_perf_2_2025-09-04
SV08-30_dim_2025-09-04
Cavity:
  • VC08-3A Recommended
  • VC08-3 Consult factory
Cartridge installation torque:
  • 19-21 ft-lb [25.8-28.5 N-m]
Maximum allowable torque:
  • Note: in aluminum
  • 40 ft-lb [54 N-m]
Coil nut torque:
  • 4-5 ft-lb [5.4-6.8 N-m]
Orientation restriction:
  • None
Seal kit:
  • Note: X = seal option
  • SK08-3X-MM
Housings:
Coils:
SV08-30_order_2025-09-04

Model Options

SV08-30EG-H-J-L
E Manual Override
CODE
DESCRIPTION
BLANK
NONE
M
Two Position Override, Red Knurled Knob
G Screen
CODE
DESCRIPTION
BLANK
NONE
S
60 Mesh Screen
H Line Body
CODE
DESCRIPTION
0
No Body
4T
Aluminum SAE 4
6T
Aluminum SAE 6
6TD
Ductile Iron SAE 6
8TD
Ductile Iron SAE 8
3B
Aluminum BSPP 3/8" (3)
3BD
Ductile Iron BSPP 3/8" (3)
J Seal
CODE
DESCRIPTION
N
Buna-N
V
Fluorocarbon
P
Polyurethane
U
PPDI Urethane
L Coil
CODE
DESCRIPTION
0
No Coil
10DL
10 VDC, D-Coil, Dual Lead Wires
10DR/D
10 VDC, D-Coil, Deutsch with Diode
10DS
10 VDC, D-Coil, Dual Spade
10EL
10 VDC, E-Coil, Dual Lead Wires, 18 inches long
10EL/36
10 VDC, E-Coil, Dual Lead Wires, 36 inches long
10ER
10 VDC, E-Coil, Deutsch
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
12DG
12 VDC, D-Coil, DIN 43650
12DL
12 VDC, D-Coil, Dual Lead Wires, 18 inches long
12DL/36
12 VDC, D-Coil, Dual Lead Wires, 36 inches long
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
12DR
12 VDC, D-Coil, Deutsch
12DR/D
12 VDC, D-Coil, Deutsch with Diode
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
12DS
12 VDC, D-Coil, Dual Spade
12EG
12 VDC, E-Coil, DIN 43650
12EG/Z
12 VDC, E-Coil, DIN 43650 with Zener Diode
12EJ
12 VDC, E-Coil, AMP Jr.
12EJ/Z
12 VDC, E-Coil, AMP Jr. with Zener Diode
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
12ER
12 VDC, E-Coil, Deutsch
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
12EY
12 VDC, E-Coil, Metri-Pack 150
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
20DG
20 VDC, D-Coil, DIN 43650
20DS
20 VDC, D-Coil, Dual Spade
20ER
20 VDC, E-Coil, Deutsch
20ER/Z
20 VDC, E-Coil, Deutsch with Zener Diode
24AG
24 VDC, D-Coil, DIN 43650
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
24DG
24 VDC, D-Coil, DIN 43650
24DL
24 VDC, D-Coil, Dual Lead Wires, 18 inches long
24DL/36
24 VDC, D-Coil, Dual Lead Wires, 36 inches long
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
24DR
24 VDC, D-Coil, Deutsch
24DR/D
24 VDC, D-Coil, Deutsch with Diode
24DR/Z
24 VDC, D-Coil, Deutsch with Zener Diode
24DS
24 VDC, D-Coil, Dual Spade
24EG
24 VDC, E-Coil, DIN 43650
24EG/Z
24 VDC, E-Coil, DIN 43650 with Zener Diode
24EJ
24 VDC, E-Coil, AMP Jr.
24EL/D
24 VDC, E-Coil, Dual Lead Wires with Diode
24ER
24 VDC, E-Coil, Deutsch
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
24EY
24 VDC, E-Coil, Metri-Pack 150
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
36DG
36 VDC, D-Coil, DIN 43650
36DS
36 VDC, D-Coil, Dual Spade
115AG
115 VAC, D-Coil, DIN 43650
115AP
115 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
230AG
230 VAC, D-Coil, DIN 43650
230AP
230 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
SV08-30_sym_2025-09-04
STP Files Download PDF of Page Request a Quote

Related Products

SV08-35

SV08-35

SOLENOID CARTRIDGE VALVE SPOOL, 3 PORT
See Details
Datasheet
SV08-31

SV08-31

SOLENOID CARTRIDGE VALVE SPOOL, 3 PORT
See Details
Datasheet
SV38-30

SV38-30

SOLENOID CARTRIDGE VALVE SPOOL, 3 PORT
See Details
Datasheet
SV07-31

SV07-31

SOLENOID CARTRIDGE VALVE SPOOL, 3 PORT
See Details
Datasheet
SV58-30

SV58-30

Solenoid cartridge valve spool, 3 port, high pressure
See Details
Datasheet