Compact Motion Control Valves - Flow Control Valves - Flow regulator

VRFC3C (G 3/8-G 1/2-G 3/4-G 1)

Description

A constant priority flow, regardless of system pressures, is established from E to P, while a minimum pressure differential of appr. 5 bar (70 psi) exists between the two ports. While the regulated priority flow from P is used in the priority circuit, the flow supplied to E in excess of priority is by-passed to B port and can be sent to power other actuators. Priority flow can be varied from closed to the nominal maximum rating of the valve. Reverse flow from P to E is limited by the selected opening of the restrictor and is not pressure compensated. Reverse flow from B is not permitted.

General:
Operating pressure:
  • up to 210 bar (3000 psi)
QE= max. inlet flow “E” port (see “Dimensions”):
QP= max. priority flow “P” port (see “Dimensions”:
Flow range adjustment:
  • 0 - 3 turns
Weight:
  • see “Dimensions”
Manifold material:
  • Note: Note: aluminium bodies are often strong enough for operating pressures exceeding 210 bar (3000 psi), depending from the fatigue life expected in the specific application. If in doubt, consult our Service Network.
  • Aluminium
Fluid:
  • Mineral oil (HL, HLP) according DIN 51524
Fluid temperature range:
  • -30 °C to 100 (-22 to 212 °F)
Viscosity range:
  • 5 to 800 mm²/s (cSt)
Recommended degree of fluid contamination:
  • Class 19/17/14 according to ISO 4406
Other technical data:
  • Note: Note: for applications outside these parameters, please consult us.
  • see data sheet 18350-50
RE18309-50-01(2023-10-30)
RE18309-50-order(2023-10-30)
RE18309-50-dim(2023-10-30)