Sleeve for Line Mounting - Directional Control Valves - Check

CAB

RE18316-45-01(2023-11-01)
Description

Flow is always allowed to pass from A to B when pressure at A rises above 0.5 bar (7.25 psi). Reverse flow from B to A is possible only when pressure at B rises above the return spring bias pressure; the return B to A cracking pressure can be chosen among the various X values available (see table).

RE18316-45-02(2023-11-01)
  • Very compact design and inline mounting for space saving
  • Three sizes provide great adaptability to the system.
  • Mounting position is unrestricted.
  • Very low Δp.
  • Different values of cracking pressure are available for B-A flow (see the relevant table).

NOTE: the valve is available also with a choice of cracking pressures B-A, as shown by the relevant table: when ordering please specify the desired B-A cracking pressure expressed in “bar” value in the code position (**).

In direction A-B the cracking pressure is always 0.5 bar.

Steel body, zinc plated

NOTE: the valve is available also with a choice of cracking pressures B-A, as shown by the relevant table: when ordering please specify the desired B-A cracking pressure expressed in “bar” value in the code position (**).

In direction A-B the cracking pressure is always 0.5 bar.

RE18316-45-3
General:
Code:
  • Pressure P max bar (psi)
CAB 38:
  • 350 (5000)
CAB 12:
  • 350 (5000)
CAB 34:
  • 250 (3600)
RE18316-45-dim(2023-11-01)
Code
Ports size A-B
Hex mm (inches)
L mm (inches)
CAB 38
G 3/8
30 (1.18)
102 (4.02)
CAB 12
G 1/2
36 (1.42)
130 (5.12)
CAB 34
G 3/4
46 (1.81)
155 (6.10)

They can be fitted in line either when it is necessary to build-up some pressure “B-A” before feeding an actuator (ex.: opening of the mechanical safety brake before starting a motor), or they can be employed to allow free upstream flow “A-B”, and build-up some back pressure “B-A” to hold or stabilize the reverse motion.

RE18316-45-order(2023-11-01)