Directional Valves — HyPerformance

HPE42-S67C — Piloted, Proportional, Spool-Type Valve
   Selection guide - similar valves.
   PDF file of this page.
   Request a quote.

HPE42-S67C Valve

U.S. Patent 6,554,014

HPE42-S67C Valve symbol

A high pressure, screw-in, cartridge-style, pilot-operated, spring-centered, spool-type,
hydraulic directional valve.

In neutral position, the HPE42-S67C blocks all ports. When the remote pilot signal at 1 exceeds
the force of the bias spring, the spool shifts proportionally to the applied pilot pressure to allow
flow from 3 to 4 through a load such as a hydraulic cylinder or motor, and from 2 to 5 and to tank.
Port 5 is to be used as a tank port only with maximum pressure of 69 bar (1000 psi). On remote
pilot signal at 6, the valves spool shifts proportionally to the applied pressure in the opposite direction, reversing the flow direction. The valves spool is symmetrical, providing meter-in and meter-out control.

• Hardened spool and cage for long life.
• Cost-effective cavity.
• Excellent metering characteristics.
• Good Linearity.
• All HyPerformance products are tested to the rigorous standards of the NFPA specification
  T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

Max. Operating Pressure: Ports 2, 3, 4: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi);
   Ports 1 and 6 (pilot): 35 bar (500 psi); Port 5 (tank): 69 bar (1000 psi)
Flow: up to 170 lpm (45 gpm);
Maximum Internal Leakage: at 350 bar (5075 psi): 590 ml/minute (36 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
   -54° to 107°C (-65°F to 225°F) with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC42-S6 Variation A; See page 9.142.1_6w
Cavity Tool: HCT42-S6xx; See page 8.600.1
Seal Kit: HSK42-S6U-0000; See page 8.650.1


HPE42-S67C Performance

HPE42-S67C Valve Dimensions


Cartridge: Weight: 2.0 kg. (4.5 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals without back-ups standard.

Ported Body: Weight: 16.61 kg.
(32.62 lbs.) H-series ductile iron standard. Rated to 345 bar (5000 psi).
See page 8.042.1_6w

HPE42-S67C Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.