Directional Valves — HyPerformance

HPD16-S67D — Piloted, 4-Way, Spool-Type Valve
  Selection guide - similar valves.
  PDF file of this page
  Request a quote

HPD16-S67D Valve

HPD16-S67D Valve symbol

A high-pressure, screw-in, cartridge-style, pilot-operated, 4-way, spool-type, hydraulic directional valve.

When the HPD16-S67D is in neutral position, port 3 is blocked and flow is allowed between ports 2, 4, and 5. When remote pilot signal at 1 exceeds force of bias spring, the spool shifts to allow flow from 3 to 4 and from 2 to 5. When remote pilot signal at 6 exceeds force of bias spring, the spool shifts to allow flow from 3 to 2 and from 4 to 5.

• Hardened spool and cage for long life.
• 110 and 170 psi bias springs available
• All HyPerformance products are tested to the rigorous standards of the NFPA specification
  T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
   Note: All HyPerformance products are tested for 900K cycles at 350 bar and 100K at 420 bar
Proof Pressure: 690 bar (10000 psi)
Burst Pressure: 1380 bar (20000 psi)
Flow: 95 lpm (25 gpm)
Maximum Internal Leakage: at 350 bar (5070 psi): 492 ml/minute (30 cu. in./minute)
Temperature: -40° to 100°C (-40° to 212°F) with Buna N seals;
   -26° to 204°C (-15° to 400°F) with Fluorocarbon seals;
   -54° to 107°C (-65° to 225°F) with standard PPDI Urethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
   7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
   Note: Adaptor lock kit HF P/N 4207540 (sold spearately) may be require when pilot pressure
   exceeds 35 bar (500 psi).
Cavity: HVC16-S6; See page 9.116.1_6w
Cavity Tool: HCT16-S6xx; See page 8.600.1
Seal Kit: HSK16-S6U-00000 (PPDI Urethane); See page 8.650.1


HPD16-S67D Valve Performance Chart

HPD16-S67D Valve Dimensions


Cartridge: Weight: 1.0 kg. (2.2 lbs.);
Steel with hardened work surfaces.
Zinc-plated exposed surfaces; Buna N
O-rings and polyester elastomer back-ups standard.

Ported Body: Weight: 9.13 kg.
(20.14 lbs.); H-series ductile iron standard. Rated to 345 bar (5000 psi). See page 8.016.1_6w

HPD16-S67D Ordering Chart

Selection guide - similar valves.
PDF file of this page. Request a quote.