Solenoid-Operated On/Off Valve — HyPerformance™

HSV10-44R — Spool-Type, 4-Way, 2-Position
  Selection guide - similar valves.
  PDF file of this page.
  Request a quote.

HSV10-40R Valve

HSV10-40R Valve symbol
A solenoid-operated, 4-way, 2-position, spool-type, direct-acting, screw-in hydraulic cartridge valve for applications requiring high pressure operation.

When de-energized, the HSV10-44R allows flow between 3 and 1. When energized, the cartridges spool shifts to open flow between 3 and 4, and between 2 and 1.

• Hardened precision spool and cage for long life.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design, continuous-duty rated.
• Waterproof E‑Coils rated up to IP69K; optional voltages and terminations.
• Corrosion-resistant plating.
• All HyPerformance products are tested to NFPA specification T2.6.1
  and are tested at a verification level of 90% and an assurance of 99%.

Operating Pressure: 350 bar (5075 psi); 10% cycle life: 420 bar (6090 psi)
  Note: all HyPerformance products are tested for 900K cycles at 350 bar and 100K cycles at 420 bar.
Proof Pressure: 6950 bar (10000 psi)
Burst Pressure: 1380 bar (20,000 psi)
Flow: See Performance Chart
Max. Internal Leakage:
  Port 3 to 1, Energized: 164 ml/minute (10 cu. in./minute.) at 350 bar (5075 psi);
  Port 1 to 3, Energized: 245 ml/minute (15 cu. in./minute.) at 350 bar (5075 psi)
Temperature: -54 to 107 °C (-65 to 225 °F) with Urethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: 1.7 A at 12 Vdc; 0.85 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 350 bar (5075 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: HVC10-4; See page 9.110.1_4w
Cavity Tool: HCT10-4xx; See page 8.600.1
Seal Kit: SK10-4U-OOO; See page 8.650.1


HSV10-40R Valve Performance Chart
HSV10-40R Valve Dimensions


Cartridge: Weight: 0.22 kg (0.48 lb); Steel with hardened work surfaces. Corrosion-resistant zinc-nickel plated exposed surfaces; Urethane O‑ring without back-ups standard.

Ported Body: Weight: 1.70 kg (3.76 lb); H‑series ductile iron standard. Rated to 350 bar (5075 psi). See page 8.010.1_4w.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.
See page 3.400.1_10-size.

HSV10-40R Ordering Chart

Selection guide - similar valves.
PDF file of this page.   Request a quote.