Valves - Solenoid on/off Controls - 2-Position 2-Way - Poppet Type - Normally Closed - Bidirectional Blocking

HSV10-28

HIGH PRESSURE SOLENOID VALVE PILOTED, 2-WAY, POPPET TYPE NORMALLY OPEN

Overview

Description

The hsv10-29x is a high pressure 2-way, piloted, poppet-type, normally open, bi-directional, screw-in hydraulic cartridge valve designed to function as a load holding or blocking valve in applications requiring low internal leakage bi-directionally

Operation

When de-energized, the hsv10-29x allows flow in both directions. When energized, the valve blocks flow in both directions

Manual Override Operation

To shift the valve manually, push and hold down manual override button/knob. Note: the manual override features is intended for emergency use, not for continuous-duty operation

Features

  • Continuous-duty rated coil.
  • Hardened seat for long life and low leakage.
  • Optional coil voltages and terminations.
  • Efficient wet-armature construction.
  • Cartridges are voltage interchangeable.
  • Waterproof E-Coils rated up to IP69K.
  • Unitized, molded coil design.
  • 1000-hour salt-spray rated solenoid tubes and coils.
  • All HyPerformance products are tested to NFPA specification T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

Ratings

Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) 10% cycle life
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
75.7 lpm (20 gpm)
Maximum internal leakage
5 drops/min With 350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Cartridge weight
0.18 kg (0.4 lb) Without coil and nut
Internal wetted surface area
161 cm² (24.9 in²) Hsv10-29
163 cm² (25.2 in²) Hsv10-29p/29k

Performance

HSV10-28_Perf_Chrt

Dimensions

HSV10-28_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.18 kg. (0.39 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Urethane O-ring without back-up standard.

Ported Body: Weight: 1.19 kg. (2.62lbs.); HyPerformance™ Ductile iron (code 'D') standard. Rated to 345 bar (5000 psi).

E-Coil: Weight: 0.41 kg. (0.9 lbs.); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
Hvc10-2
Cartridge installation torque
102 to 115 N-m (75 to 85 ft-lb) Steel/ductile iron cavity
81 to 88 N-m (60 to 65 ft-lb) Aluminum cavity
Orientation restriction
None

Accessories

Seal kit
SK10-2N-M Buna N
SK10-2V-M Fluorocarbon
SK10-2U-0 Urethane

Order code

POSITION
CODE
DESCRIPTION
HSV10-A28AE-H-J-L-M
A
Position Sensor Option
A
28
Standard
A
P28A
Position Indicator Switch with Resticted Flow
E
Manual Override
E
BLANK
NONE
E
M
Two Position Override, Red Knurled Knob
H
Line Body
H
0
No Body
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
HV
High Durometer Fluorocarbon
J
U
PPDI Urethane
L
Coil
L
0
No Coil
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
L
115AG
115 VAC, D-Coil, DIN 43650
L
115AP
115 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
230AG
230 VAC, D-Coil, DIN 43650
L
230AP
230 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
M
Position Sensor Termination
M
BLANK
No Position Sensor
M
M3
Neutral Sense, M12-4P, Dual Output NC/NO
M
N3
Neutral Sense, DT04-4P, Dual Output NC/NO
HSV10-28_Order