Valves - Solenoid on/off Controls - 2-Position 4-Way - Normally Open

SV10-40

SOLENOID CARTRIDGE VALVE SPOOL, 4 PORT, 2 POSITION

Overview

Description

A solenoid-operated, 4 port, 2 position, direct-acting, spool-type, screw-in hydraulic cartridge valve. When de-energized,

Operation

The SV10-40X allows flow from port 3 to port 2, as well as from port 4 to port 1. When energized, the spool shifts to open port 3 to port 4 and port 2 to port 1

Features

  • Continuous-duty rated coil.
  • Hardened precision spool and cage for long life.
  • Optional coil voltages and terminations.
  • Efficient wet-armature construction.
  • Cartridges are voltage interchangeable.
  • All ports may be fully pressurized.
  • Unitized, molded coil design.
  • Manual override option.
  • Optional waterproof E‑Coils rated up to IP69K.
  • Industry-common cavity.
Pressure Ratings
Pressure rating:
  • 207 bar (3000 psi)
Proof pressure:
  • 276 bar (4000 psi)
Burst pressure:
  • 621 bar (9000 psi)
Flow Ratings
Flow rating:
  • 23 lpm (6 gpm)
Maximum internal leakage:
  • 82 ml/min (5 in³/min ) Tested at port 3 (de-energized) out port 1 with ports 2 and 4 blocked 207 bar (3000 psi)
Temperature Ratings
Operating fluid temperature:
  • -40 to 100 °C (-40 to 212 °F) With buna N seals
  • -26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
  • -54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature:
  • -40 to 70 °C (-40 to 160 °F)
Ambient temperature:
  • -40 to 70 °C (-40 to 160 °F)
Other Ratings
Response:
  • 36 ms Energized (first indication of change of state with 100% voltage applied to the coil with flow at 23 lpm (6 gpm)
  • 20 ms De-energized (first indication of change of state with 100% voltage applied to the coil with flow at 23 lpm (6 gpm)
Corrosion protection:
  • 960 hr salt spray per ASTM b117 (gsv10-40x)
Fluids:
  • Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range:
  • 7.4 to 420 cSt
Maximum operating contamination level:
  • 20/18/14 per ISO 4406
Unit weight:
  • 0.18 kg (0.40 lb) (sv10-40)
Internal wetted surface area:
  • 163 cm² (25.3 in²) (sv10-40)
SV10-40_Perf_Chrt
SV10-40_Dim_Dwg

Materials

Cartridge: Weight: 0.20 kg (0.45 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.

Standard Ported Body: Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E‑Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Cavity:
Cartridge installation torque:
  • 32.5 to 35.3 N-m (24 to 26 ft-lb)
Maximum allowable torque:
  • 54.2 N-m (40 ft-lb)
Coil nut torque:
  • 6.8 to 9.5 N-m (5 to 7 ft-lb)
Orientation restriction:
  • None
Position sensor technical reference:
SV10-40_Order_wSensor
POSITION
CODE
DESCRIPTION
SV10-A40E-H-J-L-M
A
Position Sensor Option
A
40
Standard
A
P40
Position Indicator Switch
E
Manual Override
E
BLANK
NONE
E
J
Momentary Pull Override, #10-32 threads
E
M
Two Position Override, Red Knurled Knob
E
Y
Momentary Pull Override, Red Knurled Knob
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
H
8T
Aluminum SAE 8
H
6TD
Ductile Iron SAE 6
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
L
Coil
L
0
No Coil
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires, 18 inches long
L
12DL/36
12 VDC, D-Coil, Dual Lead Wires, 36 inches long
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
L
115AG
115 VAC, D-Coil, DIN 43650
L
115AP
115 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
230AG
230 VAC, D-Coil, DIN 43650
L
230AP
230 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
M
Position Sensor Termination
M
BLANK
No Position Sensor
M
M3
Neutral Sense, M12-4P, Dual Output NC/NO
M
N3
Neutral Sense, DT04-4P, Dual Output NC/NO