Valve elements 4 ways 3 positions.
Control spools manual operated by hand lever.
Control spool with return spring or mechanical detent for all three positions.
Size 6
Series 00
Maximum operating pressure 310 bar (4500 psi)
Maximum flow 60 l/min (15.8 gpm)
Port connections G 3/8 - G 1/2 - SAE8
The sandwich plate design directional valve elements L8_1... are compact manual operated valves which control the start, the stop and the direction of the oil flow.
These elements basically consist of a stackable housing (1) with a control spool (2), a block with the control lever (3), and a spring housing (4) with a return spring (5).
The hand operated lever moves the control spool (2) from its neutral-central position “0” to the required position “a” or “b”, and the required flow from P to A (with B to T), or P to B (with A to T) is achieved.
Type L8_L1_2S_ __M100 is the valve version in which the return spring (5) brings the spool back to neutral-central position “0” when the manual lever is not operated.
The valve is available with a choice of spool variants (refer to page 2).
Type L8_L1_2S_ __F100 is the valve version with mechanical detent in which the control spool (2) stays in anyone of the 3 achieved positions “0”, “a” or “b” when the lever is left free. With this valve, the oil delivery can continue without any action on the lever.
Also this version is available with a choice of spool variants (refer to page 2).
Special types of control are available upon request.
For applications with different specifications consult us
Measured with hydraulic fluid ISO-VG32 at 45° ±5 °C (113° ±9 °F); ambient temperature 20 °C (68 °F).
