Sleeve for Line Mounting - Flow Control Valves - Flow regulator

SFC-FF

  • Compact design and inline mounting for space saving.
  • Mounting position is unrestricted.
  • The inserted flow regulator cartridge can be purchased separately for easy service or for modifications to the original flow adjustment (see data sheet RE 18329-75).
Description

This valve is composed by a sleeve with an inserted pressure compensated flow regulator cartridge (SFC1); it controls the oil flow from B to A, and prevents it from exceeding the selected value regardless of working pressure, while establishing a minimum pressure differential between the two ports. The inserted cartridge is available in different sizes (as well as the sleeve), and each size is available with different orifices, each one for a pre-determined flow (see “Z” table of Regulated Flow. In the reverse direction, A to B, flow is locked.

Steel body, zinc plated

General:
SFC1 Code:
  • Ports A-B
0T.F1.01.00.09...:
  • G 1/4
0T.F1.01.00.02...:
  • G 3/8
0T.F1.01.00.03...:
  • G 1/2
RE18316-12-dim(2023-11-27)
Y
Ports A-B
L mm (inches)
Hex mm (inches)
Sleeve code
09
G 1/4
61 (2.40)
19 (0.75)
OC.51.02.023
02
G 3/8
63 (2.48)
22 (0.87)
OC.51.02.024
03
G 1/2
72.5 (2.85)
27 (1.06)
OC.51.02.025
Z
REGULATED FLOW RANGE (± 10%) at 100 bar (1450 psi) l/min (gpm)
01
02
03
04
05
06
07
08
09
10
G 1/4
1 (0.3)
2 (0.5)
3 (0.8)
4 (1.1)
5 (1.3)
6 (1.9)
7 (1.9)
8 (2.1)
9 (2.4)
10 (2.6)
G 3/8
4 (1.1)
5 (1.3)
6 (1.6)
8 (2.1)
10 (2.6)
12 (3.2)
14 (3.7)
16 (4.2)
-
-
G 1/2
12 (3.2)
16 (4.2)
20 (5.3)
25 (6.6)
30 (7.9)
35 (9.3)
40 (10.6)
45 (11.9)
-
-

Typical applications are the limitation of the flow into a line; it can also be used as a Meter-OUT device in order to limit the flow out from a one-way working line. The flow, and consequently the maximum actuator speed, will vary slightly with changes in fluid viscosity, but will be largely independent from the load and from the working pressure.

RE18316-12-order(2023-11-27)