Valves - Directional Controls - Check Valve

HCV10-20

CHECK VALVE

Overview

Description

The HCV10-20 is a screw-in, cartridge style, hydraulic check valve for use as a blocking or load-holding device for high pressure applications

Operation

The check valve allows flow from port 1 to 2, while normally blocking flow in the opposite direction. The cartridge valve has a fully guided poppet which is spring biased closed until sufficient pressure is applied at port 1 to open to port 2

Features

  • Hardened seat for long life and low leakage.
  • Optional bias springs for back-pressure application flexibility.
  • High pressure operation.
  • Fully guided check assembly.
  • Industry-common cavity.
  • All HyPerformance products are tested to NFPA specification T2.6.1 and are tested at a verification level of 90% and an assurance of 99%.

Ratings

Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) (10% cycle life)
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
76 lpm (20 gpm)
Maximum internal leakage
0.25 ml/min (5 drops/min) At
350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Cartridge weight
0.10 kg (0.22 lb)
Internal wetted surface area
75 cm² (11.5 in²)

Performance

HCV10-20_Perf_Chrt

Dimensions

HCV10-20_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.10 kg (0.22 lb) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Urethane seals standard.

Standard Ported Body: Weight: 1.19 kg (2.62 lb) H-series ductile iron, rated to 350 bar (5075 psi).

Installation Specifications

Cavity
Hvc10-2
Cartridge installation torque
102 to 115 N-m (75 to 85 ft-lb) Steel/ductile iron cavity
81 to 88 N-m (60 to 65 ft-lb) Aluminum cavity
Orientation restriction
None

Accessories

Seal kit
SK10-2N-T Buna N
SK10-2V-T Fluorocarbon
SK10-2U-O Urethane

Order code

POSITION
CODE
DESCRIPTION
HCV10-20-H-J-R
H
Line Body
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
U
PPDI Urethane
R
Spring
R
2
2 psi Bias Spring
R
5
5 psi Bias Spring
R
15
15 psi Bias Spring
R
30
30 psi Bias Spring
R
40
40 psi Bias Spring
R
70
70 psi Bias Spring
R
100
100 psi Bias Spring
R
200
200 psi Bias Spring
HCV10-20_Order