Valves - Electro-proportional Controls - 3-Position 5-way - Motor Center - Vented Load Sense

SP08-58D

SOLENOID PROPORTIONAL VALVE 3 POSITION, 5 PORT, MOTOR SPOOL

Overview

Description

This SP08-58DX valve is a direct-acting 3 position, 5 port proportional directional control. With port 1 as a load sense port, it is a screw in cartridge type for use with general purpose hydraulic fluids

Features

  • Continuous-duty rated solenoid.
  • Hardened precision spool and cage for long life.
  • Optional coil voltages and terminations.
  • Manual override option.
  • Efficient wet-armature construction.
  • Optional waterproof E-Coils rated up to IP69K.
  • Cartridges are voltage interchangeable.
  • Compact size.

Ratings

Pressure Ratings
Pressure rating
207 bar (3000 psi) Per NFPA t2.6.1 r2-2000 using 99.9 assurance and 90% verification levels
Proof pressure
345 bar (5000 psi) SP08-58D
Burst pressure
655 bar (9500 psi) SP08-58D
Flow Ratings
Minimum flow rating
7.6 lpm (2.0 gpm) S1, s2. Based on with pressure compensator at maximum control current. (see performance graphs) 10.3 bar (150 psid)
Maximum internal leakage
164 ml/min (10 in³/min) At valve de-energized from port 5 to ports 2 or 4 (ports 3 and 1 are blocked) 207 bar (3000 psi)
Hysteresis flow
0.8 lpm (0.2 gpm) Maximum, from 1.5 to 7.57 lpm (0.4 to 2.0 gpm)
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt

Properties

Cartridge weight
0.17 kg (0.38 lb) SP08-58D
0.23 kg (0.50 lb) SP08-58DM
0.25 kg (0.55 lb) SP08-58DB
Internal wetted surface area
178 cm² (27.6 in²)

Electrical Parameters

Valve inductance
124 mH S1
97 mH S2
Maximum control current
1.0 A D-coil 12 Vdc
Minimum control current
Threshold current
Threshold current
12 Vdc (d-coil) see performance graphs
Dither PWM frequency
90 to 110 Hz
Dither PWM frequency
90 to 110 Hz

Performance

SP08-58D_Perf_Chrt1 SP08-58D_Perf_Chrt2 SP08-58D_Perf_Chrt3

Dimensions

SP08-57D_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.15 kg (0.34 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard.

Standard Ported Body: Weight: 0.41 kg (0.85 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.11 kg (0.25 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E-Coil: Weight: 0.14 kg (0.3 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
VC08-5
Cartridge installation torque
33.9 to 40.7 N-m (25 to 30 ft-lb)
Maximum allowable torque
54.2 N-m (40 ft-lb) Aluminum
Coil nut torque
5.4 to 6.8 N-m (4 to 5 ft-lb)
Orientation restriction
None

Accessories

Order code

POSITION
CODE
DESCRIPTION
SP08-58DE-H-J-L
D
Max Flow Rating
D
BLANK
7.6 lpm (2.0 gpm) Flow Rating
D
L
3.3 lpm (0.83 gpm) Flow Rating
E
Manual Override
E
B
Momentary PushPull Override, 1.5" Diameter Aluminum Knob
E
BLANK
NONE
E
K
Three Position Override, 1.5" Diameter Aluminum Knob
E
M
Momentary Push/Pull Override, Red Knurled Knob
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
L
Coil
L
0
No Coil, D-Coil Spacer
L
0E
No Coil, E-Coil Spacer
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EG/Z
12 VDC, E-Coil, DIN 43650 with Zener Diode
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EJ/Z
12 VDC, E-Coil, AMP Jr. with Zener Diode
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DG
20 VDC, D-Coil, DIN 43650
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
20ER/Z
20 VDC, E-Coil, Deutsch with Zener Diode
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DR/Z
24 VDC, D-Coil, Deutsch with Zener Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EG/Z
24 VDC, E-Coil, DIN 43650 with Zener Diode
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL/D
24 VDC, E-Coil, Dual Lead Wires with Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DG
36 VDC, D-Coil, DIN 43650
L
36DS
36 VDC, D-Coil, Dual Spade
SP08-58D_Order