Valves - Solenoid on/off Controls - 2-Position 2-Way - Poppet Type - Normally Open - Free Reverse Flow

HSV12-23

SOLENOID CARTRIDGE VALVE POPPET, 2-WAY, NORMALLY OPEN

Overview

Description

The HSV12-23X is a high pressure 2-way, piloted, poppet-type, normally open screw in hydraulic cartridge valve designed for low leakage in load holding applications

Operation

When de-energized, the HSV12-23X allows flow bi-directionally. When energized, the valve's poppet closes on its seat, blocking flow from ports 2-1. In this mode the cartridge will allow flow from ports 1-2 after overcoming the actuator and spring forces (see performance graph)

Manual Override Operation

To shift the valve manually, push and hold down manual override button/knob

note: the manual override feature is intended for emergency use, not for continuous-duty operation

Features

  • Bi-directional operation.
  • Continuous-duty rated solenoid.
  • Hardened seat for long life and low leakage.
  • Optional coil voltages and terminations.
  • Efficient wet-armature construction.
  • Cartridges are voltage interchangeable.
  • Manual override option.
  • Waterproof E-Coils rated up to IP69K.
  • Corrosion-resistant plating.
  • Unitized, molded coil design.
  • Cost effective cavity.
  • All HyPerformance™ products are tested to NFPA specification T2.6.1. and are tested at a verification level of 90% and an assurance of 99%.

Ratings

Pressure Ratings
Pressure rating
350 bar (5075 psi)
420 bar (6090 psi) 10% cycle life
Proof pressure
690 bar (10000 psi)
Burst pressure
1380 bar (20000 psi)
Flow Ratings
Flow rating
113.6 lpm (30 gpm)
Maximum internal leakage
7 drops/min With at port 2 350 bar (5075 psi)
Other Ratings
Cycle life
One million cycles
Temperature Ratings
Operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Unit weight
0.29 kg (0.63 lb) Without coil and nut
Internal wetted surface area
205 cm² (31.8 in²) HSV12-23
207 cm² (32.1 in²) Hsv12-23p/23k

Performance

HSV12-23_Perf_Chrt

Dimensions

HSV12-23_Dim_Dwg

Materials

Materials

Cartridge: Weight: (without coil and nut) 0.2 kg (0.6 lb) Steel with hardened work surfaces. Urethane seals without back-up rings standard.

Standard Ported Body: Weight: 2.6 kg (1.1 lb) H–series ductile iron. Rated to 35 bar (507 psi).

10-Size E-Coil: Weight: 0.4 kg (0. lb); Fully encapsulated with rugged external metal shell. Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
Hvc12-2
Cartridge installation torque
183 to 196 N-m (135 to 145 ft-lb) Steel/ductile iron cavity
122 to 136 N-m (90 to 100 ft-lb) Aluminum cavity
Orientation restriction
None

Accessories

Seal kit
SK12-2N-T Buna N
SK12-2V-T Fluorocarbon
SK12-2U-O Urethane

Order Code

POSITION
CODE
DESCRIPTION
HSV12-23E-H-J-L
E
Manual Override
E
BLANK
NONE
E
K
Momentary Push Override, Knob
E
P
Momentary Push Override, Button
H
Line Body
H
0
No Body
H
12HT
Ductile Iron SAE 12
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
U
PPDI Urethane
L
Coil
L
0
No Coil
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires, 18 inches long
L
12DL/36
12 VDC, D-Coil, Dual Lead Wires, 36 inches long
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
L
115AG
115 VAC, D-Coil, DIN 43650
L
115AP
115 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
230AG
230 VAC, D-Coil, DIN 43650
L
230AP
230 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
HSV12-23_Order