Valves - Solenoid on/off Controls - 2-Position 2-Way - Poppet Type - Normally Open - Restrictive Reverse Flow

SV10-21

SOLENOID CARTRIDGE VALVE POPPET, 2 WAY, NORMALLY OPEN

Overview

Description

A solenoid-operated, 2 way, piloted, poppet-type, normally open, screw in hydraulic cartridge valve designed for low leakage in load-holding applications

Operation

When de-energized, the SV10-21 allows flow from port 2 to port 1. Flow from port 1 to port 2 is severely restricted in this mode. When energized, the valves poppet closes on its seat, blocking flow in the port 2 to port 1 direction. In this mode the cartridge will allow port 1 to port 2 flow after overcoming the solenoid force (requires 50 to 150 psi [3.4 to 10.3 bar])

Features

  • Continuous-duty rated coil.
  • Hardened seat for long life and low leakage.
  • Optional coil voltages and terminations.
  • Efficient wet-armature construction.
  • Cartridges are voltage interchangeable.
  • Unitized, molded coil design.
  • Manual override option.
  • Optional waterproof E-Coils rated up to IP69K.
  • Industry common cavity.

Ratings

Pressure Ratings
Pressure rating
207 bar (3000 psi)
Proof pressure
344 bar (5000 psi)
Burst pressure
779 bar (11300 psi) (sv10-20)
Flow Ratings
Flow rating
102 lpm (27 gpm) Based on
34.4 bar (500 psi) See performance graph
Maximum internal leakage
3 drops/min At 207 bar (3000 psi)
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
20/18/14 per ISO 4406

Properties

Cartridge weight
0.16 kg (0.35 lb) Cartridge only
0.46 kg (1.02 lb) Cartridge with e-coil
Internal wetted surface area
210 cm² (32.5 in²)
Materials
continuous from 85% to 115% of nominal voltage

Performance

SV10-21_Perf_Chrt

Dimensions

SV10-21_Dim_Dwg

Materials

Materials

:

Cartridge: Weight: 0.16 kg. (0.35 lbs.); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and polyester elastomer back-up standard.

Standard Ported Body: Weight: 0.16 kg. (0.35 lbs.); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.27 kg. (0.60 lbs.); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E-Coil: Weight: 0.41 kg. (0.9 lbs.); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
VC10-2
Cartridge installation torque
32.5 to 35.3 N-m (24 to 26 ft-lb)
Coil nut torque
6.8 to 9.5 N-m (5 to 7 ft-lb)
Orientation restriction
None

Accessories

Optional Position Sensor

Position sensor technical reference

Order code

POSITION
CODE
DESCRIPTION
SV10-21EG-H-J-L
E
Manual Override
E
BLANK
NONE
E
HP
Momentary Push Override, Button with Protective Nut
E
K
Momentary Push Override, Knob
E
P
Momentary Push Override, Button
G
Screen
G
BLANK
NONE
G
S
100 Mesh Screen
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
H
8T
Aluminum SAE 8
H
6TD
Ductile Iron SAE 6
H
8TD
Ductile Iron SAE 8
H
2B
Aluminum BSPP 1/4" (2)
H
3B
Aluminum BSPP 3/8" (3)
H
4B
Aluminum BSPP 1/2" (4)
H
4BD
Ductile Iron BSPP 1/2" (4)
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
L
Coil
L
0
No Coil
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
L
115AG
115 VAC, D-Coil, DIN 43650
L
115AP
115 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
230AG
230 VAC, D-Coil, DIN 43650
L
230AP
230 VAC, D-Coil, 1/2" Conduit and Dual Lead Wires
SV10-21_Order