Valves - Electro-proportional Controls - 3-Position 4-Way - Motor Center

SP10-47D

SOLENOID PROPORTIONAL VALVE 3 POSITION, 4 PORT MOTOR CENTER

Overview

Description

A solenoid operated, direct acting, 3 position, 4-way, motor spool, proportional directional control. It is a screw in hydraulic cartridge valve for use with general purpose hydraulic fluids. Manual override feature is available as an option

Operation

When de-energized, the SP10-47DX blocks flow to port 3, while allowing flow from port 2 to port 1 and port 4 to port 1. When coil #1 is energized, flow is allowed from port 3 to port 4, and from port 2 to port 1. When coil #2 is energized, flow is allowed from port 3 to port 2, and from port 4 to port 1

note: that while port 1 may be fully pressurized, it is not intended for use as the valves inlet

Features

  • Continuous-duty rated solenoid.
  • Hardened precision spool and cage for long life.
  • Optional coil voltages and terminations.
  • Manual override option.
  • Optional waterproof E-Coils rated up to IP69K.
  • Efficient wet-armature construction.
  • Cartridges are voltage interchangeable.
  • Good linearity and hysteresis.
  • Industry-common cavity.

Ratings

Pressure Ratings
Pressure rating
250 bar (3625 psi)
Proof pressure
345 bar (5000 psi)
Burst pressure
827 bar (12000 psi)
Flow Ratings
Flow rating
22.7 lpm (6.0 gpm)
20.8 lpm (5.5 gpm) Manual override options "b" and "m"
Maximum internal leakage
246 ml/min (15 in³/min) At
207 bar (3000 psi) (from port 3 to 4 or port 3 to 2 with the valve in neutral)
Hysteresis per cent
10 % Maximum, flow rating between lpm (1.0 to 5.5 gpm)
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
20/18/14 per ISO 4406

Properties

Cartridge weight
0.27 kg (0.60 lb) SP10-47D
Internal wetted surface area
233 cm² (36.1 in²) SP10-47D

Electrical Parameters

Valve inductance
198 mH At 1.2 A
Maximum control current
1.2 A For coil 12 V
Minimum control current
Threshold current
Threshold current
0.40 A (s1) nominal for coil 12 V
0.42 A (s2) nominal for coil 12 V
Dither PWM frequency
100 Hz

Performance

SP10-47D_Perf_Chrt1 SP10-47D_Perf_Chrt2

Dimensions

SP10-47C_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.30 kg (0.65 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and back-ups standard.

Standard Ported Body: Weight: 0.36 kg (0.80 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
VC10-4
Cartridge installation torque
32.5 to 35.3 N-m (24 to 26 ft-lb)
Coil nut torque
6.8 to 9.5 N-m (5 to 7 ft-lb)
Orientation restriction
None

Accessories

Order code

POSITION
CODE
DESCRIPTION
SP10-47DE-H-J-L
E
Manual Override
E
B
Momentary Push/Pull Override, 1.5" Diameter Aluminum Knob
E
BLANK
NONE
E
K
Three Position Override, 1.5" Diameter Aluminum Knob
E
M
Momentary Push/Pull Override, Red Knurled Knob
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
H
8T
Aluminum SAE 8
H
6TD
Ductile Iron SAE 6
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
L
Coil
L
0
No Coil, D-Coil Spacer
L
0E
No Coil, E-Coil Spacer
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL
12 VDC, D-Coil, Dual Lead Wires
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL
12 VDC, E-Coil, Dual Lead Wires
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL
24 VDC, E-Coil, Dual Lead Wires
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
SP10-47D_Order