Valves - Electro-proportional Controls - Pressure Controls - Proportional Relief - Piloted - Pressure Rising with Current

TS10-26

SOLENOID OPERATED SPOOL TYPE RELIEF VALVE U.S. PATENT # 7,137,406

Overview

Description

The TS10-26X is a screw-in, cartridge style, pilot-operated, spool-type, relief valve which CAN be infinitely adjusted across a prescribed range using a variable electric current. The regulated pressure is proportional to the input electrical current

Operation

The TS10-26X blocks flow from port 1 to port 2 until sufficient pressure is present at port 1 to open the pilot section by offsetting the electrically induced solenoid force. With no current applied, the valve will relieve at approximately 100 psi [6,9 bar]

Features

  • 12 and 24 volt coils standard.
  • Optional waterproof E-Coils rated up to IP69K.
  • Industry common cavity.
  • Optional manual override.

Ratings

Pressure Ratings
Pressure rating
241.3 bar (3500 psi) Port 1
206.8 bar (3000 psi) Port 2
Proof pressure
344.7 bar (4000 psi)
Burst pressure
827.4 bar (12000 psi) With coil assembled
Adjustable pressure range
6.9 to 206.8 bar (100 to 3000 psi) Model code A
6.9 to 158.6 bar (100 to 2300 psi) Model code b
6.9 to 117.2 bar (100 to 1700 psi) Model code c
Flow Ratings
Flow rating
94.6 lpm (25 gpm) At ΔP (cartridge only) port 1 to 2 (coil de-energized) 9.6 bar (190 psi)
Maximum pilot flow
0.76 lpm (0.2 gpm)
Temperature Ratings
Operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With polyurethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 70 °C (-40 to 160 °F)
Other Ratings
Corrosion protection
960 hr salt spray per ASTM b117

Operating Parameters

Fluids
Mineral based or synthetic with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Unit weight
0.25 kg (0.55 lb)
Internal wetted surface area
163 cm² (25.2 in²) TS10-26X
168 cm² (26.1 in²) TS10-26XM

Performance

TS10-26_Perf_Chrt1 TS10-26_Perf_Chrt2

Dimensions

TS10-26_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.25 kg (0.55 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O-rings and polyester elastomer back-ups standard.

Standard Ported Body: Weight: 0.16 kg (0.35 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.32 kg (0.7 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Installation Specifications

Cavity
VC10-2
Cartridge installation torque
34 to 36.7 N-m (25 to 27 ft-lb)
Maximum allowable torque
54.2 N-m (40 ft-lb)
Coil nut torque
9.5 to 13.6 N-m (7 to 10 ft-lb)
Orientation restriction
None

Accessories

Order Code

POSITION
CODE
DESCRIPTION
TS10-26DE-H-J-L
D
Regulating Pressure Range
D
A
6.9 to 206.8 bar (100 to 3000 psi) Pressure Range
D
B
6.9 to 158.6 bar (100 to 2300 psi) Pressure Range
D
C
6.9 to 117.2 bar (100 to 1700 psi) Pressure Range
E
Manual Override
E
BLANK
NONE
E
M
Minimum Regulated Pressure Override, 3/16" Internal Hex
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
H
8T
Aluminum SAE 8
H
6TD
Ductile Iron SAE 6
H
8TD
Ductile Iron SAE 8
H
2B
Aluminum BSPP 1/4" (2)
H
3B
Aluminum BSPP 3/8" (3)
H
4B
Aluminum BSPP 1/2" (4)
H
4BD
Ductile Iron BSPP 1/2" (4)
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
L
Coil
L
0
No Coil
L
10DG
10 VDC, D-Coil, DIN 43650
L
10DL
10 VDC, D-Coil, Dual Lead Wires
L
10DR/D
10 VDC, D-Coil, Deutsch with Diode
L
10DS
10 VDC, D-Coil, Dual Spade
L
10EL
10 VDC, E-Coil, Dual Lead Wires
L
10ER
10 VDC, E-Coil, Deutsch
L
10ER/Z
10 VDC, E-Coil, Deutsch with Zener Diode
L
12DG
12 VDC, D-Coil, DIN 43650
L
12DL
12 VDC, D-Coil, Dual Lead Wires, 18 inches long
L
12DL/36
12 VDC, D-Coil, Dual Lead Wires, 36 inches long
L
12DL/W
12 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
12DL/W/D
12 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
12DR
12 VDC, D-Coil, Deutsch
L
12DR/D
12 VDC, D-Coil, Deutsch with Diode
L
12DR/Z
12 VDC, D-Coil, Deutsch with Zener Diode
L
12DS
12 VDC, D-Coil, Dual Spade
L
12EG
12 VDC, E-Coil, DIN 43650
L
12EJ
12 VDC, E-Coil, AMP Jr.
L
12EL
12 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
12EL/36
12 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
12EL/W/Z
12 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
12EL/Z
12 VDC, E-Coil, Dual Lead Wires with Zener Diode
L
12ER
12 VDC, E-Coil, Deutsch
L
12ER/Z
12 VDC, E-Coil, Deutsch with Zener Diode
L
12EY
12 VDC, E-Coil, Metri-Pack 150
L
12EY/Z
12 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
20DR/D
20 VDC, D-Coil, Deutsch with Diode
L
20DS
20 VDC, D-Coil, Dual Spade
L
20ER
20 VDC, E-Coil, Deutsch
L
24AG
24 VDC, D-Coil, DIN 43650
L
24AP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DG
24 VDC, D-Coil, DIN 43650
L
24DL
24 VDC, D-Coil, Dual Lead Wires
L
24DL/W
24 VDC, D-Coil, Dual Lead Wires with Weatherpak
L
24DL/W/D
24 VDC, D-Coil, Dual Lead Wires with Weatherpak with Diode
L
24DP
24 VDC, D-Coil, 1/2" Conduit and Dual Lead Wires
L
24DR
24 VDC, D-Coil, Deutsch
L
24DR/D
24 VDC, D-Coil, Deutsch with Diode
L
24DS
24 VDC, D-Coil, Dual Spade
L
24EG
24 VDC, E-Coil, DIN 43650
L
24EJ
24 VDC, E-Coil, AMP Jr.
L
24EL
24 VDC, E-Coil, Dual Lead Wires, 18 inches long
L
24EL/36
24 VDC, E-Coil, Dual Lead Wires, 36 inches long
L
24EL/W/Z
24 VDC, E-Coil, Dual Lead Wires with WeatherPak and Zener Diode
L
24ER
24 VDC, E-Coil, Deutsch
L
24ER/Z
24 VDC, E-Coil, Deutsch with Zener Diode
L
24EY
24 VDC, E-Coil, Metri-Pack 150
L
24EY/Z
24 VDC, E-Coil, Metri-Pack 150 with Zener Diode
L
36DS
36 VDC, D-Coil, Dual Spade
TS10-26_Order